White LEDs with limit luminous efficacy

V. M. Lisitsyn, V. S. Lukash, S. A. Stepanov, Ju Yangyang

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

9 Цитирования (Scopus)

Выдержка

In most promising widespread gallium nitride based LEDs emission is generated in the blue spectral region with a maximum at about 450nm which is converted to visible light with the desired spectrum by means of phosphor. The thermal energy in the conversion is determined by the difference in the energies of excitation and emission quanta and the phosphor quantum yield. Heat losses manifest themselves as decrease in the luminous efficacy. LED heating significantly reduces its efficiency and life. In addition, while heating, the emission generation output and the efficiency of the emission conversion decrease. Therefore, the reduction of the energy losses caused by heating is crucial for LED development. In this paper, heat losses in phosphor-converted LEDs (hereinafter chips) during spectrum conversion are estimated. The limit values of the luminous efficacy for white LEDs are evaluated.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction"
Подзаголовок основной публикацииProceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction"
ИздательAmerican Institute of Physics Inc.
Том1698
ISBN (электронное издание)9780735413450
DOI
СостояниеОпубликовано - 15 янв 2016
Событие2nd All-Russian Scientific Conference of Young Scientists on Advanced Materials in Technology and Construction, AMTC 2015 - Tomsk, Российская Федерация
Продолжительность: 6 окт 20159 окт 2015

Конференция

Конференция2nd All-Russian Scientific Conference of Young Scientists on Advanced Materials in Technology and Construction, AMTC 2015
СтранаРоссийская Федерация
ГородTomsk
Период6.10.159.10.15

Отпечаток

light emitting diodes
phosphors
heating
heat
gallium nitrides
thermal energy
energy dissipation
chips
output
excitation
energy

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Lisitsyn, V. M., Lukash, V. S., Stepanov, S. A., & Yangyang, J. (2016). White LEDs with limit luminous efficacy. В Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction": Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction" (Том 1698). [060008] American Institute of Physics Inc.. https://doi.org/10.1063/1.4937863

White LEDs with limit luminous efficacy. / Lisitsyn, V. M.; Lukash, V. S.; Stepanov, S. A.; Yangyang, Ju.

Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction": Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction". Том 1698 American Institute of Physics Inc., 2016. 060008.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Lisitsyn, VM, Lukash, VS, Stepanov, SA & Yangyang, J 2016, White LEDs with limit luminous efficacy. в Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction": Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction". том. 1698, 060008, American Institute of Physics Inc., 2nd All-Russian Scientific Conference of Young Scientists on Advanced Materials in Technology and Construction, AMTC 2015, Tomsk, Российская Федерация, 6.10.15. https://doi.org/10.1063/1.4937863
Lisitsyn VM, Lukash VS, Stepanov SA, Yangyang J. White LEDs with limit luminous efficacy. В Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction": Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction". Том 1698. American Institute of Physics Inc. 2016. 060008 https://doi.org/10.1063/1.4937863
Lisitsyn, V. M. ; Lukash, V. S. ; Stepanov, S. A. ; Yangyang, Ju. / White LEDs with limit luminous efficacy. Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction": Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction". Том 1698 American Institute of Physics Inc., 2016.
@inproceedings{c8d4836c8a9d4e8e869ba80f9f33f8ec,
title = "White LEDs with limit luminous efficacy",
abstract = "In most promising widespread gallium nitride based LEDs emission is generated in the blue spectral region with a maximum at about 450nm which is converted to visible light with the desired spectrum by means of phosphor. The thermal energy in the conversion is determined by the difference in the energies of excitation and emission quanta and the phosphor quantum yield. Heat losses manifest themselves as decrease in the luminous efficacy. LED heating significantly reduces its efficiency and life. In addition, while heating, the emission generation output and the efficiency of the emission conversion decrease. Therefore, the reduction of the energy losses caused by heating is crucial for LED development. In this paper, heat losses in phosphor-converted LEDs (hereinafter chips) during spectrum conversion are estimated. The limit values of the luminous efficacy for white LEDs are evaluated.",
author = "Lisitsyn, {V. M.} and Lukash, {V. S.} and Stepanov, {S. A.} and Ju Yangyang",
year = "2016",
month = "1",
day = "15",
doi = "10.1063/1.4937863",
language = "English",
volume = "1698",
booktitle = "Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists {"}Advanced Materials in Technology and Construction{"}",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - White LEDs with limit luminous efficacy

AU - Lisitsyn, V. M.

AU - Lukash, V. S.

AU - Stepanov, S. A.

AU - Yangyang, Ju

PY - 2016/1/15

Y1 - 2016/1/15

N2 - In most promising widespread gallium nitride based LEDs emission is generated in the blue spectral region with a maximum at about 450nm which is converted to visible light with the desired spectrum by means of phosphor. The thermal energy in the conversion is determined by the difference in the energies of excitation and emission quanta and the phosphor quantum yield. Heat losses manifest themselves as decrease in the luminous efficacy. LED heating significantly reduces its efficiency and life. In addition, while heating, the emission generation output and the efficiency of the emission conversion decrease. Therefore, the reduction of the energy losses caused by heating is crucial for LED development. In this paper, heat losses in phosphor-converted LEDs (hereinafter chips) during spectrum conversion are estimated. The limit values of the luminous efficacy for white LEDs are evaluated.

AB - In most promising widespread gallium nitride based LEDs emission is generated in the blue spectral region with a maximum at about 450nm which is converted to visible light with the desired spectrum by means of phosphor. The thermal energy in the conversion is determined by the difference in the energies of excitation and emission quanta and the phosphor quantum yield. Heat losses manifest themselves as decrease in the luminous efficacy. LED heating significantly reduces its efficiency and life. In addition, while heating, the emission generation output and the efficiency of the emission conversion decrease. Therefore, the reduction of the energy losses caused by heating is crucial for LED development. In this paper, heat losses in phosphor-converted LEDs (hereinafter chips) during spectrum conversion are estimated. The limit values of the luminous efficacy for white LEDs are evaluated.

UR - http://www.scopus.com/inward/record.url?scp=84984585647&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84984585647&partnerID=8YFLogxK

U2 - 10.1063/1.4937863

DO - 10.1063/1.4937863

M3 - Conference contribution

AN - SCOPUS:84984585647

VL - 1698

BT - Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction"

PB - American Institute of Physics Inc.

ER -