"Water bath" effect during the electrical underwater wire explosion

V. I. Oreshkin, S. A. Chaikovsky, N. A. Ratakhin, A. Grinenko, Ya E. Krasik

Результат исследований: Материалы для журналаСтатьярецензирование

34 Цитирования (Scopus)

Аннотация

The results of a simulation of underwater electrical wire explosion at a current density > 109 A/cm2, total discharge current of ∼3 MA, and rise time of the current of ∼ 100 ns are presented. The electrical wire explosion was simulated using a one-dimensional radiation-magnetohydrodynamic model. It is shown that the radiation of the exploded wire produces a thin conducting plasma shell in the water in the vicinity of the exploding wire surface. It was found that this plasma shell catches up to 30% of the discharge current. Nevertheless, it was shown that the pressure and temperature of the wire material remain unchanged as compared with the idealized case of the electrical wire explosion in vacuum. This result is explained by a "water bath" effect.

Язык оригиналаАнглийский
Номер статьи102703
ЖурналPhysics of Plasmas
Том14
Номер выпуска10
DOI
СостояниеОпубликовано - 2007
Опубликовано для внешнего пользованияДа

ASJC Scopus subject areas

  • Physics and Astronomy(all)
  • Condensed Matter Physics

Fingerprint Подробные сведения о темах исследования «"Water bath" effect during the electrical underwater wire explosion». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать