Visualization and analysis of pulsed ion beam energy density profile with infrared imaging

Результат исследований: Материалы для журналаСтатья

5 Цитирования (Scopus)

Аннотация

Infrared imaging technique was used as a surface temperature-mapping tool to characterize the energy density distribution of intense pulsed ion beams on a thin metal target. The technique enables the measuring of the total ion beam energy and the energy density distribution along the cross section and allows one to optimize the operation of an ion diode and control target irradiation mode. The diagnostics was tested on the TEMP-4M accelerator at TPU, Tomsk, Russia and on the TEMP-6 accelerator at DUT, Dalian, China. The diagnostics was applied in studies of the dynamics of the target cooling in vacuum after irradiation and in the experiments with target ablation. Errors caused by the target ablation and target cooling during measurements have been analyzed. For Fluke Ti10 and Fluke Ti400 infrared cameras, the technique can achieve surface energy density sensitivity of 0.05 J/cm2 and spatial resolution of 1–2 mm. The thermal imaging diagnostics does not require expensive consumed materials. The measurement time does not exceed 0.1 s; therefore, this diagnostics can be used for the prompt evaluation of the energy density distribution of a pulsed ion beam and during automation of the irradiation process.

Язык оригиналаАнглийский
Страницы (с-по)140-146
Число страниц7
ЖурналInfrared Physics and Technology
Том89
DOI
СостояниеОпубликовано - 1 мар 2018

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics

Fingerprint Подробные сведения о темах исследования «Visualization and analysis of pulsed ion beam energy density profile with infrared imaging». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать