Use of microsecond plasma opening switch for material surface modification

V. M. Bystritskii, S. V. Grigoriev, I. V. Lisitsyn, A. A. Sinebryukhov, V. A. Sinebryukhov, G. E. Remnev, V. K. Strutz

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

4 Цитирования (Scopus)

Аннотация

The use of microsecond plasma opening switch for material surface modification was studied using two types of plasma sources, the gas-puff plasma guns and regular flashboards, both powered by a capacitor bank of 3 to 6 microfarads. The material modifications were done with several types of the steels, including stainless POS cathode electrode, and samples of P6M5 and CoW steel, distributed along the cathode. Microhardness measurements were performed and surface properties were analyzed.

Язык оригиналаАнглийский
Название основной публикацииIEEE International Pulsed Power Conference - Digest of Technical Papers
РедакторыKenneth R. Prestwich, William L. Baker
Место публикацииPiscataway, NJ, United States
ИздательIEEE
Страницы1013-1015
Число страниц3
Том2
СостояниеОпубликовано - 1993
СобытиеProceedings of the 1993 9th IEEE International Pulsed Power Conference. Part 2 (of 2) - Albuquerque, NM, USA
Продолжительность: 21 июн 199323 июн 1993

Другое

ДругоеProceedings of the 1993 9th IEEE International Pulsed Power Conference. Part 2 (of 2)
ГородAlbuquerque, NM, USA
Период21.6.9323.6.93

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Use of microsecond plasma opening switch for material surface modification». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать