Use of catalytic anodes for zinc electrowinning at high current densities from purified electrolytes

M. Bestetti, U. Ducati, G. H. Kelsall, G. Li, E. Guerra

    Результат исследований: Материалы для журналаСтатья

    17 Цитирования (Scopus)

    Выдержка

    Substantial energy savings are possible in zinc electrowinning by substituting catalytic oxygen evolution anodes for conventional lead-silver anodes. However, it is well known that the harmful effects of impurities usually present in zinc electrolyte solutions limit the service life of catalytic anodes, though their purification by solvent extraction could obviate such problems. Laboratory scale zinc deposition experiments with synthetic electrolytes have been performed to determine the effects of current density, temperature and electrolyte composition on cell voltages and current efficiencies. These data sets were used in an assessment of the optimum design parameters of the tank house. Zinc electrowinning at high current densities (higher than 2000 A/m2) using catalytic anodes and purified solutions (by solvent extraction) is proposed as an alternative to the conventional process, which is based on lead-silver anodes working at relatively low current densities (ca. 500 A/m2). Finally, a system for continuous deposition and stripping of the metal is discussed.

    Язык оригиналаАнглийский
    Страницы (с-по)451-458
    Число страниц8
    ЖурналCanadian Metallurgical Quarterly
    Том40
    Номер выпуска4
    DOI
    СостояниеОпубликовано - окт 2001

    Отпечаток

    Electrowinning
    Electrolytes
    Zinc
    Anodes
    Current density
    Solvent extraction
    Silver
    Lead
    Service life
    Purification
    Energy conservation
    Metals
    Impurities
    Oxygen
    Electric potential
    Chemical analysis
    Experiments

    ASJC Scopus subject areas

    • Metals and Alloys
    • Industrial and Manufacturing Engineering

    Цитировать

    Use of catalytic anodes for zinc electrowinning at high current densities from purified electrolytes. / Bestetti, M.; Ducati, U.; Kelsall, G. H.; Li, G.; Guerra, E.

    В: Canadian Metallurgical Quarterly, Том 40, № 4, 10.2001, стр. 451-458.

    Результат исследований: Материалы для журналаСтатья

    Bestetti, M. ; Ducati, U. ; Kelsall, G. H. ; Li, G. ; Guerra, E. / Use of catalytic anodes for zinc electrowinning at high current densities from purified electrolytes. В: Canadian Metallurgical Quarterly. 2001 ; Том 40, № 4. стр. 451-458.
    @article{7876b05c46f64ea6adb5ef2159dca9bb,
    title = "Use of catalytic anodes for zinc electrowinning at high current densities from purified electrolytes",
    abstract = "Substantial energy savings are possible in zinc electrowinning by substituting catalytic oxygen evolution anodes for conventional lead-silver anodes. However, it is well known that the harmful effects of impurities usually present in zinc electrolyte solutions limit the service life of catalytic anodes, though their purification by solvent extraction could obviate such problems. Laboratory scale zinc deposition experiments with synthetic electrolytes have been performed to determine the effects of current density, temperature and electrolyte composition on cell voltages and current efficiencies. These data sets were used in an assessment of the optimum design parameters of the tank house. Zinc electrowinning at high current densities (higher than 2000 A/m2) using catalytic anodes and purified solutions (by solvent extraction) is proposed as an alternative to the conventional process, which is based on lead-silver anodes working at relatively low current densities (ca. 500 A/m2). Finally, a system for continuous deposition and stripping of the metal is discussed.",
    author = "M. Bestetti and U. Ducati and Kelsall, {G. H.} and G. Li and E. Guerra",
    year = "2001",
    month = "10",
    doi = "10.1179/cmq.2001.40.4.451",
    language = "English",
    volume = "40",
    pages = "451--458",
    journal = "Canadian Metallurgical Quarterly",
    issn = "0008-4433",
    publisher = "Maney Publishing",
    number = "4",

    }

    TY - JOUR

    T1 - Use of catalytic anodes for zinc electrowinning at high current densities from purified electrolytes

    AU - Bestetti, M.

    AU - Ducati, U.

    AU - Kelsall, G. H.

    AU - Li, G.

    AU - Guerra, E.

    PY - 2001/10

    Y1 - 2001/10

    N2 - Substantial energy savings are possible in zinc electrowinning by substituting catalytic oxygen evolution anodes for conventional lead-silver anodes. However, it is well known that the harmful effects of impurities usually present in zinc electrolyte solutions limit the service life of catalytic anodes, though their purification by solvent extraction could obviate such problems. Laboratory scale zinc deposition experiments with synthetic electrolytes have been performed to determine the effects of current density, temperature and electrolyte composition on cell voltages and current efficiencies. These data sets were used in an assessment of the optimum design parameters of the tank house. Zinc electrowinning at high current densities (higher than 2000 A/m2) using catalytic anodes and purified solutions (by solvent extraction) is proposed as an alternative to the conventional process, which is based on lead-silver anodes working at relatively low current densities (ca. 500 A/m2). Finally, a system for continuous deposition and stripping of the metal is discussed.

    AB - Substantial energy savings are possible in zinc electrowinning by substituting catalytic oxygen evolution anodes for conventional lead-silver anodes. However, it is well known that the harmful effects of impurities usually present in zinc electrolyte solutions limit the service life of catalytic anodes, though their purification by solvent extraction could obviate such problems. Laboratory scale zinc deposition experiments with synthetic electrolytes have been performed to determine the effects of current density, temperature and electrolyte composition on cell voltages and current efficiencies. These data sets were used in an assessment of the optimum design parameters of the tank house. Zinc electrowinning at high current densities (higher than 2000 A/m2) using catalytic anodes and purified solutions (by solvent extraction) is proposed as an alternative to the conventional process, which is based on lead-silver anodes working at relatively low current densities (ca. 500 A/m2). Finally, a system for continuous deposition and stripping of the metal is discussed.

    UR - http://www.scopus.com/inward/record.url?scp=0035483829&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0035483829&partnerID=8YFLogxK

    U2 - 10.1179/cmq.2001.40.4.451

    DO - 10.1179/cmq.2001.40.4.451

    M3 - Article

    AN - SCOPUS:0035483829

    VL - 40

    SP - 451

    EP - 458

    JO - Canadian Metallurgical Quarterly

    JF - Canadian Metallurgical Quarterly

    SN - 0008-4433

    IS - 4

    ER -