Ultrasonic tomography of SiC-based materials synthesized by spark plasma sintering of preceramic paper

E. P. Sedanova, M. S. Syrtanov, E. B. Kashkarov, A. S. Yurovskikh, N. Travitzky

Результат исследований: Материалы для журнала

Аннотация

This paper is devoted to study a structure of SiC-based materials using ultrasonic tomography method. The SiC-based materials were fabricated from preceramic paper using spark plasma sintering (SPS) method. Also as part of the study the Young's modulus and density of sintered materials were determined and the effect of sintering pressure changing to this parameters value was investigated. The preceramic paper is a composite material including a matrix of organic cellulose fibers and inorganic powder filler (SiC). The sintering temperature and pressure were 2373 K and 20-40 MPa, respectively. The holding time for the sintering process was 10 min. The density of sintered materials was investigated by the hydrostatic weighing method. Ultrasonic tomography was implemented using of single-channel sensor at 10 MHz frequency.

Язык оригиналаАнглийский
Номер статьи12043
ЖурналJournal of Physics: Conference Series
Том1327
Номер выпуска1
DOI
СостояниеОпубликовано - 9 окт 2019
Событие5th International Conference on Innovations in Non-Destructive Testing SibTest 2019, NDTS 2019 - Yekaterinburg, Российская Федерация
Продолжительность: 26 июн 201928 июн 2019

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Ultrasonic tomography of SiC-based materials synthesized by spark plasma sintering of preceramic paper». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать