Two-dimensional and three-dimensional evaluation of the deformation relief

E. A. Alfyorova, D. V. Lychagin

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

This work presents the experimental results concerning the research of the morphology of the face-centered cubic single crystal surface after compression deformation. Our aim is to identify the method of forming a quasiperiodic profile of single crystals with different crystal geometrical orientation and quantitative description of deformation structures. A set of modern methods such as optical and confocal microscopy is applied to determine the morphology of surface parameters. The results show that octahedral slip is an integral part of the formation of the quasiperiodic profile surface starting with initial strain. The similarity of the formation process of the surface profile at different scale levels is given. The size of consistent deformation regions is found. This is 45 μm for slip lines ([001]-single crystal) and 30 μm for mesobands ([110]-single crystal). The possibility of using two- and three-dimensional roughness parameters to describe the deformation structures was shown.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017
ИздательAmerican Institute of Physics Inc.
Том1909
ISBN (электронное издание)9780735416017
DOI
СостояниеОпубликовано - 1 дек 2017
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017 - Tomsk, Российская Федерация
Продолжительность: 9 окт 201713 окт 2017

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017
СтранаРоссийская Федерация
ГородTomsk
Период9.10.1713.10.17

Отпечаток

evaluation
single crystals
slip
profiles
crystal surfaces
roughness
microscopy
crystals

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Alfyorova, E. A., & Lychagin, D. V. (2017). Two-dimensional and three-dimensional evaluation of the deformation relief. В Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017 (Том 1909). [020002] American Institute of Physics Inc.. https://doi.org/10.1063/1.5013683

Two-dimensional and three-dimensional evaluation of the deformation relief. / Alfyorova, E. A.; Lychagin, D. V.

Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Том 1909 American Institute of Physics Inc., 2017. 020002.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Alfyorova, EA & Lychagin, DV 2017, Two-dimensional and three-dimensional evaluation of the deformation relief. в Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. том. 1909, 020002, American Institute of Physics Inc., Tomsk, Российская Федерация, 9.10.17. https://doi.org/10.1063/1.5013683
Alfyorova EA, Lychagin DV. Two-dimensional and three-dimensional evaluation of the deformation relief. В Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Том 1909. American Institute of Physics Inc. 2017. 020002 https://doi.org/10.1063/1.5013683
Alfyorova, E. A. ; Lychagin, D. V. / Two-dimensional and three-dimensional evaluation of the deformation relief. Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Том 1909 American Institute of Physics Inc., 2017.
@inproceedings{939b40a9c47a4b6ca002f7e2c9ebe6cf,
title = "Two-dimensional and three-dimensional evaluation of the deformation relief",
abstract = "This work presents the experimental results concerning the research of the morphology of the face-centered cubic single crystal surface after compression deformation. Our aim is to identify the method of forming a quasiperiodic profile of single crystals with different crystal geometrical orientation and quantitative description of deformation structures. A set of modern methods such as optical and confocal microscopy is applied to determine the morphology of surface parameters. The results show that octahedral slip is an integral part of the formation of the quasiperiodic profile surface starting with initial strain. The similarity of the formation process of the surface profile at different scale levels is given. The size of consistent deformation regions is found. This is 45 μm for slip lines ([001]-single crystal) and 30 μm for mesobands ([110]-single crystal). The possibility of using two- and three-dimensional roughness parameters to describe the deformation structures was shown.",
author = "Alfyorova, {E. A.} and Lychagin, {D. V.}",
year = "2017",
month = "12",
day = "1",
doi = "10.1063/1.5013683",
language = "English",
volume = "1909",
booktitle = "Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Two-dimensional and three-dimensional evaluation of the deformation relief

AU - Alfyorova, E. A.

AU - Lychagin, D. V.

PY - 2017/12/1

Y1 - 2017/12/1

N2 - This work presents the experimental results concerning the research of the morphology of the face-centered cubic single crystal surface after compression deformation. Our aim is to identify the method of forming a quasiperiodic profile of single crystals with different crystal geometrical orientation and quantitative description of deformation structures. A set of modern methods such as optical and confocal microscopy is applied to determine the morphology of surface parameters. The results show that octahedral slip is an integral part of the formation of the quasiperiodic profile surface starting with initial strain. The similarity of the formation process of the surface profile at different scale levels is given. The size of consistent deformation regions is found. This is 45 μm for slip lines ([001]-single crystal) and 30 μm for mesobands ([110]-single crystal). The possibility of using two- and three-dimensional roughness parameters to describe the deformation structures was shown.

AB - This work presents the experimental results concerning the research of the morphology of the face-centered cubic single crystal surface after compression deformation. Our aim is to identify the method of forming a quasiperiodic profile of single crystals with different crystal geometrical orientation and quantitative description of deformation structures. A set of modern methods such as optical and confocal microscopy is applied to determine the morphology of surface parameters. The results show that octahedral slip is an integral part of the formation of the quasiperiodic profile surface starting with initial strain. The similarity of the formation process of the surface profile at different scale levels is given. The size of consistent deformation regions is found. This is 45 μm for slip lines ([001]-single crystal) and 30 μm for mesobands ([110]-single crystal). The possibility of using two- and three-dimensional roughness parameters to describe the deformation structures was shown.

UR - http://www.scopus.com/inward/record.url?scp=85038573153&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85038573153&partnerID=8YFLogxK

U2 - 10.1063/1.5013683

DO - 10.1063/1.5013683

M3 - Conference contribution

AN - SCOPUS:85038573153

VL - 1909

BT - Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017

PB - American Institute of Physics Inc.

ER -