Turbulent natural convection combined with thermal surface radiation inside an inclined cavity having local heater

Igor V. Miroshnichenko, Mikhail A. Sheremet

Результат исследований: Материалы для журналаСтатья

13 Цитирования (Scopus)

Выдержка

A numerical study of turbulent natural convection with thermal surface radiation inside an inclined square enclosure with a local heat source has been performed. The main attention is paid to the effect of the inclination angle on the fluid flow and heat transfer. Two-dimensional equations of conservation of mass, momentum and energy using the k–ε turbulence model have been solved by finite difference method. Localized heating has been simulated by a centrally located heat source on the bottom wall. The angle of inclination, changed from 0 to π, is used as a control parameter for heat transfer. A detailed numerical analysis has been conducted for a wide range of Rayleigh number of 108–1010 and surface emissivity 0≤ε˜≤0.9. The results show that a growth of the cavity inclination angle leads to a reduction of radiative Nusselt number. In general, it was found that the values of Rayleigh number, inclination angle and surface emissivity have significant effect on the temperature and stream function contours within the enclosure. Therefore, these parameters can be very good control parameters for fluid flow and heat transfer inside the cavity. The developed numerical method and obtained results can be widely used in different engineering problems, e.g. the simulation of air flow and heat transfer from heat-generating elements in power engineering. Moreover, the obtained results provide better technical support for development and research of electronic cooling systems.

Язык оригиналаАнглийский
Страницы (с-по)122-130
Число страниц9
ЖурналInternational Journal of Thermal Sciences
Том124
DOI
СостояниеОпубликовано - 1 фев 2018

Отпечаток

Natural convection
heaters
free convection
inclination
heat transfer
Heat transfer
Radiation
cavities
radiation
Rayleigh number
enclosure
heat sources
Enclosures
emissivity
fluid flow
Flow of fluids
engineering
Electronic cooling
cooling systems
turbulence models

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Engineering(all)

Цитировать

Turbulent natural convection combined with thermal surface radiation inside an inclined cavity having local heater. / Miroshnichenko, Igor V.; Sheremet, Mikhail A.

В: International Journal of Thermal Sciences, Том 124, 01.02.2018, стр. 122-130.

Результат исследований: Материалы для журналаСтатья

@article{fb2882454278415fa30796635efcc602,
title = "Turbulent natural convection combined with thermal surface radiation inside an inclined cavity having local heater",
abstract = "A numerical study of turbulent natural convection with thermal surface radiation inside an inclined square enclosure with a local heat source has been performed. The main attention is paid to the effect of the inclination angle on the fluid flow and heat transfer. Two-dimensional equations of conservation of mass, momentum and energy using the k–ε turbulence model have been solved by finite difference method. Localized heating has been simulated by a centrally located heat source on the bottom wall. The angle of inclination, changed from 0 to π, is used as a control parameter for heat transfer. A detailed numerical analysis has been conducted for a wide range of Rayleigh number of 108–1010 and surface emissivity 0≤ε˜≤0.9. The results show that a growth of the cavity inclination angle leads to a reduction of radiative Nusselt number. In general, it was found that the values of Rayleigh number, inclination angle and surface emissivity have significant effect on the temperature and stream function contours within the enclosure. Therefore, these parameters can be very good control parameters for fluid flow and heat transfer inside the cavity. The developed numerical method and obtained results can be widely used in different engineering problems, e.g. the simulation of air flow and heat transfer from heat-generating elements in power engineering. Moreover, the obtained results provide better technical support for development and research of electronic cooling systems.",
keywords = "Inclined cavity, Local heater, Numerical results, Thermal surface radiation, Turbulent natural convection",
author = "Miroshnichenko, {Igor V.} and Sheremet, {Mikhail A.}",
year = "2018",
month = "2",
day = "1",
doi = "10.1016/j.ijthermalsci.2017.09.023",
language = "English",
volume = "124",
pages = "122--130",
journal = "International Journal of Thermal Sciences",
issn = "1290-0729",
publisher = "Elsevier Masson SAS",

}

TY - JOUR

T1 - Turbulent natural convection combined with thermal surface radiation inside an inclined cavity having local heater

AU - Miroshnichenko, Igor V.

AU - Sheremet, Mikhail A.

PY - 2018/2/1

Y1 - 2018/2/1

N2 - A numerical study of turbulent natural convection with thermal surface radiation inside an inclined square enclosure with a local heat source has been performed. The main attention is paid to the effect of the inclination angle on the fluid flow and heat transfer. Two-dimensional equations of conservation of mass, momentum and energy using the k–ε turbulence model have been solved by finite difference method. Localized heating has been simulated by a centrally located heat source on the bottom wall. The angle of inclination, changed from 0 to π, is used as a control parameter for heat transfer. A detailed numerical analysis has been conducted for a wide range of Rayleigh number of 108–1010 and surface emissivity 0≤ε˜≤0.9. The results show that a growth of the cavity inclination angle leads to a reduction of radiative Nusselt number. In general, it was found that the values of Rayleigh number, inclination angle and surface emissivity have significant effect on the temperature and stream function contours within the enclosure. Therefore, these parameters can be very good control parameters for fluid flow and heat transfer inside the cavity. The developed numerical method and obtained results can be widely used in different engineering problems, e.g. the simulation of air flow and heat transfer from heat-generating elements in power engineering. Moreover, the obtained results provide better technical support for development and research of electronic cooling systems.

AB - A numerical study of turbulent natural convection with thermal surface radiation inside an inclined square enclosure with a local heat source has been performed. The main attention is paid to the effect of the inclination angle on the fluid flow and heat transfer. Two-dimensional equations of conservation of mass, momentum and energy using the k–ε turbulence model have been solved by finite difference method. Localized heating has been simulated by a centrally located heat source on the bottom wall. The angle of inclination, changed from 0 to π, is used as a control parameter for heat transfer. A detailed numerical analysis has been conducted for a wide range of Rayleigh number of 108–1010 and surface emissivity 0≤ε˜≤0.9. The results show that a growth of the cavity inclination angle leads to a reduction of radiative Nusselt number. In general, it was found that the values of Rayleigh number, inclination angle and surface emissivity have significant effect on the temperature and stream function contours within the enclosure. Therefore, these parameters can be very good control parameters for fluid flow and heat transfer inside the cavity. The developed numerical method and obtained results can be widely used in different engineering problems, e.g. the simulation of air flow and heat transfer from heat-generating elements in power engineering. Moreover, the obtained results provide better technical support for development and research of electronic cooling systems.

KW - Inclined cavity

KW - Local heater

KW - Numerical results

KW - Thermal surface radiation

KW - Turbulent natural convection

UR - http://www.scopus.com/inward/record.url?scp=85031759497&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85031759497&partnerID=8YFLogxK

U2 - 10.1016/j.ijthermalsci.2017.09.023

DO - 10.1016/j.ijthermalsci.2017.09.023

M3 - Article

AN - SCOPUS:85031759497

VL - 124

SP - 122

EP - 130

JO - International Journal of Thermal Sciences

JF - International Journal of Thermal Sciences

SN - 1290-0729

ER -