Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 цитирование (Scopus)

Выдержка

Influence of gas-phase hydrogenation temperature and cooling rate on defect structure of commercially pure titanium alloy was experimentally studied by means of positron annihilation spectroscopy. The change of temperature in the process of gas-phase hydrogenation was in the range of 500-700°C, while the change of cooling rate was in the range of 0.4-10.4°C/min. With increasing of gas-phase hydrogenation temperature, significant increase of hydrogen sorption rate was found. High temperature gas-phase hydrogenation of commercially pure titanium alloy lead to the formation of vacancy and hydrogen-vacancy complexes. For the same concentration of hydrogen, temperature variation or variation of cooling rate had no effect on the type of defect. However, this variation provides significant changes in defect concentration.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Подзаголовок основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
ИздательAmerican Institute of Physics Inc.
Том1783
ISBN (электронное издание)9780735414457
DOI
СостояниеОпубликовано - 10 ноя 2016
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Российская Федерация
Продолжительность: 19 сен 201623 сен 2016

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
СтранаРоссийская Федерация
ГородTomsk
Период19.9.1623.9.16

Отпечаток

hydrogenation
titanium
vapor phases
cooling
defects
titanium alloys
hydrogen
temperature
high temperature gases
positron annihilation
sorption
spectroscopy

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Mikhaylov, A. A., Laptev, R. S., Kudiyarov, V. N., & Volokitina, T. L. (2016). Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates. В Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 (Том 1783). [020152] American Institute of Physics Inc.. https://doi.org/10.1063/1.4966445

Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates. / Mikhaylov, Andrey A.; Laptev, Roman S.; Kudiyarov, Viktor Nikolaevich; Volokitina, Tatiana L.

Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Том 1783 American Institute of Physics Inc., 2016. 020152.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Mikhaylov, AA, Laptev, RS, Kudiyarov, VN & Volokitina, TL 2016, Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates. в Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. том. 1783, 020152, American Institute of Physics Inc., International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016, Tomsk, Российская Федерация, 19.9.16. https://doi.org/10.1063/1.4966445
Mikhaylov AA, Laptev RS, Kudiyarov VN, Volokitina TL. Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates. В Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Том 1783. American Institute of Physics Inc. 2016. 020152 https://doi.org/10.1063/1.4966445
Mikhaylov, Andrey A. ; Laptev, Roman S. ; Kudiyarov, Viktor Nikolaevich ; Volokitina, Tatiana L. / Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates. Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Том 1783 American Institute of Physics Inc., 2016.
@inproceedings{2b6b81f16f2241daa8fba8819ec9552b,
title = "Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates",
abstract = "Influence of gas-phase hydrogenation temperature and cooling rate on defect structure of commercially pure titanium alloy was experimentally studied by means of positron annihilation spectroscopy. The change of temperature in the process of gas-phase hydrogenation was in the range of 500-700°C, while the change of cooling rate was in the range of 0.4-10.4°C/min. With increasing of gas-phase hydrogenation temperature, significant increase of hydrogen sorption rate was found. High temperature gas-phase hydrogenation of commercially pure titanium alloy lead to the formation of vacancy and hydrogen-vacancy complexes. For the same concentration of hydrogen, temperature variation or variation of cooling rate had no effect on the type of defect. However, this variation provides significant changes in defect concentration.",
author = "Mikhaylov, {Andrey A.} and Laptev, {Roman S.} and Kudiyarov, {Viktor Nikolaevich} and Volokitina, {Tatiana L.}",
year = "2016",
month = "11",
day = "10",
doi = "10.1063/1.4966445",
language = "English",
volume = "1783",
booktitle = "Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates

AU - Mikhaylov, Andrey A.

AU - Laptev, Roman S.

AU - Kudiyarov, Viktor Nikolaevich

AU - Volokitina, Tatiana L.

PY - 2016/11/10

Y1 - 2016/11/10

N2 - Influence of gas-phase hydrogenation temperature and cooling rate on defect structure of commercially pure titanium alloy was experimentally studied by means of positron annihilation spectroscopy. The change of temperature in the process of gas-phase hydrogenation was in the range of 500-700°C, while the change of cooling rate was in the range of 0.4-10.4°C/min. With increasing of gas-phase hydrogenation temperature, significant increase of hydrogen sorption rate was found. High temperature gas-phase hydrogenation of commercially pure titanium alloy lead to the formation of vacancy and hydrogen-vacancy complexes. For the same concentration of hydrogen, temperature variation or variation of cooling rate had no effect on the type of defect. However, this variation provides significant changes in defect concentration.

AB - Influence of gas-phase hydrogenation temperature and cooling rate on defect structure of commercially pure titanium alloy was experimentally studied by means of positron annihilation spectroscopy. The change of temperature in the process of gas-phase hydrogenation was in the range of 500-700°C, while the change of cooling rate was in the range of 0.4-10.4°C/min. With increasing of gas-phase hydrogenation temperature, significant increase of hydrogen sorption rate was found. High temperature gas-phase hydrogenation of commercially pure titanium alloy lead to the formation of vacancy and hydrogen-vacancy complexes. For the same concentration of hydrogen, temperature variation or variation of cooling rate had no effect on the type of defect. However, this variation provides significant changes in defect concentration.

UR - http://www.scopus.com/inward/record.url?scp=85005954412&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85005954412&partnerID=8YFLogxK

U2 - 10.1063/1.4966445

DO - 10.1063/1.4966445

M3 - Conference contribution

AN - SCOPUS:85005954412

VL - 1783

BT - Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016

PB - American Institute of Physics Inc.

ER -