Titanium and zirconium base alloys in ultra-fine grain state: Mechanical stability and failure behavior

Vladimir Danilov, Anna Eroshenko, Yury Sharkeev, Dina Orlova, Lev Zuev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

The method of grain refinement is described which is used to obtain titanium and zirconium base alloys in an ultra-fine grain state. The method involves abc-press forging and subsequent multiple-pass die rolling. It is shown that annealing performed at temperatures below the recrystallization threshold would cause formation of a stable nanostructure. The characteristics of such nanostructure would remain unaffected even at high plastic deformation levels until the fracture of the object made from this material. Both alloys having nanostructure are suitable for medical applications.

Язык оригиналаАнглийский
Название основной публикацииKey Engineering Materials
ИздательTrans Tech Publications Ltd
Страницы162-167
Число страниц6
Том683
ISBN (печатное издание)9783038357292
DOI
СостояниеОпубликовано - 2016
Событие12th International Conference on Prospects of Fundamental Sciences Development, PFSD 2015 - Tomsk, Российская Федерация
Продолжительность: 21 апр 201524 апр 2015

Серия публикаций

НазваниеKey Engineering Materials
Том683
ISSN (печатное издание)10139826

Другое

Другое12th International Conference on Prospects of Fundamental Sciences Development, PFSD 2015
СтранаРоссийская Федерация
ГородTomsk
Период21.4.1524.4.15

Отпечаток

Mechanical stability
Titanium
Zirconium
Nanostructures
Grain refinement
Medical applications
Forging
Plastic deformation
Annealing
Temperature

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Цитировать

Danilov, V., Eroshenko, A., Sharkeev, Y., Orlova, D., & Zuev, L. (2016). Titanium and zirconium base alloys in ultra-fine grain state: Mechanical stability and failure behavior. В Key Engineering Materials (Том 683, стр. 162-167). (Key Engineering Materials; Том 683). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.683.162

Titanium and zirconium base alloys in ultra-fine grain state : Mechanical stability and failure behavior. / Danilov, Vladimir; Eroshenko, Anna; Sharkeev, Yury; Orlova, Dina; Zuev, Lev.

Key Engineering Materials. Том 683 Trans Tech Publications Ltd, 2016. стр. 162-167 (Key Engineering Materials; Том 683).

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Danilov, V, Eroshenko, A, Sharkeev, Y, Orlova, D & Zuev, L 2016, Titanium and zirconium base alloys in ultra-fine grain state: Mechanical stability and failure behavior. в Key Engineering Materials. том. 683, Key Engineering Materials, том. 683, Trans Tech Publications Ltd, стр. 162-167, 12th International Conference on Prospects of Fundamental Sciences Development, PFSD 2015, Tomsk, Российская Федерация, 21.4.15. https://doi.org/10.4028/www.scientific.net/KEM.683.162
Danilov V, Eroshenko A, Sharkeev Y, Orlova D, Zuev L. Titanium and zirconium base alloys in ultra-fine grain state: Mechanical stability and failure behavior. В Key Engineering Materials. Том 683. Trans Tech Publications Ltd. 2016. стр. 162-167. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.683.162
Danilov, Vladimir ; Eroshenko, Anna ; Sharkeev, Yury ; Orlova, Dina ; Zuev, Lev. / Titanium and zirconium base alloys in ultra-fine grain state : Mechanical stability and failure behavior. Key Engineering Materials. Том 683 Trans Tech Publications Ltd, 2016. стр. 162-167 (Key Engineering Materials).
@inproceedings{0d8e3fbb7a85445b9a9243b1f2daa052,
title = "Titanium and zirconium base alloys in ultra-fine grain state: Mechanical stability and failure behavior",
abstract = "The method of grain refinement is described which is used to obtain titanium and zirconium base alloys in an ultra-fine grain state. The method involves abc-press forging and subsequent multiple-pass die rolling. It is shown that annealing performed at temperatures below the recrystallization threshold would cause formation of a stable nanostructure. The characteristics of such nanostructure would remain unaffected even at high plastic deformation levels until the fracture of the object made from this material. Both alloys having nanostructure are suitable for medical applications.",
keywords = "Biomedical materials, Electron microscopy, Grain size, Mechanical properties, Microstructure, Nanostructured materials, Pressing, Titanium and zirconium alloys",
author = "Vladimir Danilov and Anna Eroshenko and Yury Sharkeev and Dina Orlova and Lev Zuev",
year = "2016",
doi = "10.4028/www.scientific.net/KEM.683.162",
language = "English",
isbn = "9783038357292",
volume = "683",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "162--167",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Titanium and zirconium base alloys in ultra-fine grain state

T2 - Mechanical stability and failure behavior

AU - Danilov, Vladimir

AU - Eroshenko, Anna

AU - Sharkeev, Yury

AU - Orlova, Dina

AU - Zuev, Lev

PY - 2016

Y1 - 2016

N2 - The method of grain refinement is described which is used to obtain titanium and zirconium base alloys in an ultra-fine grain state. The method involves abc-press forging and subsequent multiple-pass die rolling. It is shown that annealing performed at temperatures below the recrystallization threshold would cause formation of a stable nanostructure. The characteristics of such nanostructure would remain unaffected even at high plastic deformation levels until the fracture of the object made from this material. Both alloys having nanostructure are suitable for medical applications.

AB - The method of grain refinement is described which is used to obtain titanium and zirconium base alloys in an ultra-fine grain state. The method involves abc-press forging and subsequent multiple-pass die rolling. It is shown that annealing performed at temperatures below the recrystallization threshold would cause formation of a stable nanostructure. The characteristics of such nanostructure would remain unaffected even at high plastic deformation levels until the fracture of the object made from this material. Both alloys having nanostructure are suitable for medical applications.

KW - Biomedical materials

KW - Electron microscopy

KW - Grain size

KW - Mechanical properties

KW - Microstructure

KW - Nanostructured materials

KW - Pressing

KW - Titanium and zirconium alloys

UR - http://www.scopus.com/inward/record.url?scp=84959110227&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84959110227&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.683.162

DO - 10.4028/www.scientific.net/KEM.683.162

M3 - Conference contribution

AN - SCOPUS:84959110227

SN - 9783038357292

VL - 683

T3 - Key Engineering Materials

SP - 162

EP - 167

BT - Key Engineering Materials

PB - Trans Tech Publications Ltd

ER -