TiC-based coatings deposition using electric discharged plasma

Результат исследований: Материалы для журналаСтатья

Аннотация

The aim of this work was to research the possibility of using coaxial magneto plasma accelerator for TiC-coatings deposition on steel substrates. As a result, coatings with 0.01 m2 area was deposited. They were researched using XRD, SEM; also, the nanohardness on cross section of coating was measured. The influence of energy and carbon load on phase content, average hardness and microstructure is shown. It is established that the finest microstructure and average nanohardness is 15.3 GPa are achieved at energy W = 46.7 kJ and carbon load of 2.0 grams.

Язык оригиналаАнглийский
Номер статьи012104
ЖурналJournal of Physics: Conference Series
Том830
Номер выпуска1
DOI
СостояниеОпубликовано - 4 мая 2017
Событие5th International Congress on Energy Fluxes and Radiation Effects 2016, EFRE 2016 - Tomsk, Российская Федерация
Продолжительность: 2 окт 20167 окт 2016

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «TiC-based coatings deposition using electric discharged plasma». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать