Thickness and substrate dependences of phase transition, drug release and antibacterial properties of PNIPAm-co-AAc films

R. Elashnikov, M. Radocha, S. Rimpelova, V. Švorčík, O. Lyutakov

Результат исследований: Материалы для журналаСтатья

6 Цитирования (Scopus)

Выдержка

Micron and submicron poly(N-isopropylacrylamide)-co-(acrylic acid) (PNIPAm-co-AAc) films were deposited onto silicon and gold substrates by the spin-coating procedure. The influence of polymer-substrate interaction and spatial confinement of macromolecular chains in the ultrathin polymer films on lower critical solution temperature (LCST) was investigated under different pH conditions. Shift and broadening of the LCST temperature range was observed from the critical thickness of polymer film. It was also found that the substrate plays a key role in this shift. The observed phenomenon was applied for the temperature-controllable release of a small molecular dopant (crystal violet, CV) from the ultrathin polymer films. Finally, doped ultrathin polymer films were examined for their antibacterial activity by in-contact and drop methods. It was observed that polymer thickness and support substrate can influence both CV release and antibacterial properties. Despite the fact that the concentration of CV used in PNIPAm-co-AAc was constant and thinner films contained a significantly smaller amount of CV than thicker ones, the antibacterial activity of thin films was found to be greater in several cases.

Язык оригиналаАнглийский
Страницы (с-по)86825-86831
Число страниц7
ЖурналRSC Advances
Том5
Номер выпуска105
DOI
СостояниеОпубликовано - 5 окт 2015
Опубликовано для внешнего пользованияДа

Отпечаток

Gentian Violet
Polymer films
Acrylics
Ultrathin films
Phase transitions
Crystals
Acids
Substrates
Pharmaceutical Preparations
Polymers
Thin films
Temperature
Spin coating
Silicon
Gold
Contacts (fluid mechanics)
Doping (additives)
acrylic acid
poly-N-isopropylacrylamide

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Цитировать

Thickness and substrate dependences of phase transition, drug release and antibacterial properties of PNIPAm-co-AAc films. / Elashnikov, R.; Radocha, M.; Rimpelova, S.; Švorčík, V.; Lyutakov, O.

В: RSC Advances, Том 5, № 105, 05.10.2015, стр. 86825-86831.

Результат исследований: Материалы для журналаСтатья

Elashnikov, R. ; Radocha, M. ; Rimpelova, S. ; Švorčík, V. ; Lyutakov, O. / Thickness and substrate dependences of phase transition, drug release and antibacterial properties of PNIPAm-co-AAc films. В: RSC Advances. 2015 ; Том 5, № 105. стр. 86825-86831.
@article{27712e4eedf54af6a6a5c103382396b3,
title = "Thickness and substrate dependences of phase transition, drug release and antibacterial properties of PNIPAm-co-AAc films",
abstract = "Micron and submicron poly(N-isopropylacrylamide)-co-(acrylic acid) (PNIPAm-co-AAc) films were deposited onto silicon and gold substrates by the spin-coating procedure. The influence of polymer-substrate interaction and spatial confinement of macromolecular chains in the ultrathin polymer films on lower critical solution temperature (LCST) was investigated under different pH conditions. Shift and broadening of the LCST temperature range was observed from the critical thickness of polymer film. It was also found that the substrate plays a key role in this shift. The observed phenomenon was applied for the temperature-controllable release of a small molecular dopant (crystal violet, CV) from the ultrathin polymer films. Finally, doped ultrathin polymer films were examined for their antibacterial activity by in-contact and drop methods. It was observed that polymer thickness and support substrate can influence both CV release and antibacterial properties. Despite the fact that the concentration of CV used in PNIPAm-co-AAc was constant and thinner films contained a significantly smaller amount of CV than thicker ones, the antibacterial activity of thin films was found to be greater in several cases.",
author = "R. Elashnikov and M. Radocha and S. Rimpelova and V. Švorč{\'i}k and O. Lyutakov",
year = "2015",
month = "10",
day = "5",
doi = "10.1039/c5ra13972d",
language = "English",
volume = "5",
pages = "86825--86831",
journal = "RSC Advances",
issn = "2046-2069",
publisher = "Royal Society of Chemistry",
number = "105",

}

TY - JOUR

T1 - Thickness and substrate dependences of phase transition, drug release and antibacterial properties of PNIPAm-co-AAc films

AU - Elashnikov, R.

AU - Radocha, M.

AU - Rimpelova, S.

AU - Švorčík, V.

AU - Lyutakov, O.

PY - 2015/10/5

Y1 - 2015/10/5

N2 - Micron and submicron poly(N-isopropylacrylamide)-co-(acrylic acid) (PNIPAm-co-AAc) films were deposited onto silicon and gold substrates by the spin-coating procedure. The influence of polymer-substrate interaction and spatial confinement of macromolecular chains in the ultrathin polymer films on lower critical solution temperature (LCST) was investigated under different pH conditions. Shift and broadening of the LCST temperature range was observed from the critical thickness of polymer film. It was also found that the substrate plays a key role in this shift. The observed phenomenon was applied for the temperature-controllable release of a small molecular dopant (crystal violet, CV) from the ultrathin polymer films. Finally, doped ultrathin polymer films were examined for their antibacterial activity by in-contact and drop methods. It was observed that polymer thickness and support substrate can influence both CV release and antibacterial properties. Despite the fact that the concentration of CV used in PNIPAm-co-AAc was constant and thinner films contained a significantly smaller amount of CV than thicker ones, the antibacterial activity of thin films was found to be greater in several cases.

AB - Micron and submicron poly(N-isopropylacrylamide)-co-(acrylic acid) (PNIPAm-co-AAc) films were deposited onto silicon and gold substrates by the spin-coating procedure. The influence of polymer-substrate interaction and spatial confinement of macromolecular chains in the ultrathin polymer films on lower critical solution temperature (LCST) was investigated under different pH conditions. Shift and broadening of the LCST temperature range was observed from the critical thickness of polymer film. It was also found that the substrate plays a key role in this shift. The observed phenomenon was applied for the temperature-controllable release of a small molecular dopant (crystal violet, CV) from the ultrathin polymer films. Finally, doped ultrathin polymer films were examined for their antibacterial activity by in-contact and drop methods. It was observed that polymer thickness and support substrate can influence both CV release and antibacterial properties. Despite the fact that the concentration of CV used in PNIPAm-co-AAc was constant and thinner films contained a significantly smaller amount of CV than thicker ones, the antibacterial activity of thin films was found to be greater in several cases.

UR - http://www.scopus.com/inward/record.url?scp=84944810554&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84944810554&partnerID=8YFLogxK

U2 - 10.1039/c5ra13972d

DO - 10.1039/c5ra13972d

M3 - Article

AN - SCOPUS:84944810554

VL - 5

SP - 86825

EP - 86831

JO - RSC Advances

JF - RSC Advances

SN - 2046-2069

IS - 105

ER -