Аннотация

The thermal imaging diagnostics of measuring pulsed electron beam energy density is presented. It provides control of the electron energy spectrum and a measure of the density distribution of the electron beam cross section, the spatial distribution of electrons with energies in the selected range, and the total energy of the electron beam. The diagnostics is based on the thermal imager registration of the imaging electron beam thermal print in a material with low bulk density and low thermal conductivity. Testing of the thermal imaging diagnostics has been conducted on a pulsed electron accelerator TEU-500. The energy of the electrons was 300-500 keV, the density of the electron current was 0.1-0.4 kAcm 2, the duration of the pulse (at half-height) was 60 ns, and the energy in the pulse was up to 100 J. To register the thermal print, a thermal imager Fluke-Ti10 was used. Testing showed that the sensitivity of a typical thermal imager provides the registration of a pulsed electron beam heat pattern within one pulse with energy density over 0.1 Jcm 2 (or with current density over 10 Acm 2, pulse duration of 60 ns and electron energy of 400 keV) with the spatial resolution of 0.9-1 mm. In contrast to the method of using radiosensitive (dosimetric) materials, thermal imaging diagnostics does not require either expensive consumables, or plenty of processing time.

Язык оригиналаАнглийский
Номер статьи103301
ЖурналReview of Scientific Instruments
Том83
Номер выпуска10
DOI
СостояниеОпубликовано - окт 2012

ASJC Scopus subject areas

  • Instrumentation

Fingerprint Подробные сведения о темах исследования «Thermal imaging diagnostics of high-current electron beams». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать