Thermal fatigue and failure of electronic power device substrates

S. Pietranico, S. Pommier, S. Lefebvre, S. Pattofatto

Результат исследований: Материалы для журналаСтатья

30 Цитирования (Scopus)

Выдержка

Electronic power devices used for transportation applications (automotive and avionics) experience severe temperature variations, which promote their thermal fatigue and failure. For example, for power modules mounted on the engine of an aircraft, temperature variations range from -55 °C (in the worst case of storage before takeoff) to +200 °C (flight). Direct bonded copper (DBC) substrates are used to isolate chips (silicon dies) from their base plates. For large thermal amplitudes, the failure occurs in DBC substrates, which are copper/ceramic/copper sandwiches. The Weibull approach was used to model the brittle fracture of the ceramic layer from a natural defect. Furthermore, geometric singularities in the upper ceramic/copper interface are at the origin of cracks that grow by fatigue along the interface and finally bifurcate and break the ceramic layer. It is discussed how the framework of linear elastic fracture mechanics (LEFM) can be used to characterize the stress field around singularities and the associated risk of failure. These two criteria and the finite element method, allow analysing how a thermal loading history may modify the risk of failure of DBC substrates. It was shown, in particular, that three overcooling cycles should produce an "overload retardation effect". Experimentally, applying three "overload cycles" (-70 °C, +180 °C), prior to thermal fatigue cycles (-30 °C, +180 °C), increased very significantly the fatigue life of DBC substrates. This result shows that the fatigue life and the reliability of power electronic devices could be optimized using a thermo-mechanical approach of the problem and suitable failure criteria.

Язык оригиналаАнглийский
Страницы (с-по)1911-1920
Число страниц10
ЖурналInternational Journal of Fatigue
Том31
Номер выпуска11-12
DOI
СостояниеОпубликовано - 1 ноя 2009
Опубликовано для внешнего пользованияДа

Отпечаток

Thermal fatigue
Power Electronics
Power electronics
Copper
Fatigue
Substrate
Substrates
Fatigue Life
Fatigue of materials
Overload
Cycle
Singularity
Brittle Fracture
Failure Criterion
Avionics
Fracture Mechanics
Sandwich
Weibull
Brittle fracture
Takeoff

ASJC Scopus subject areas

  • Modelling and Simulation
  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Цитировать

Thermal fatigue and failure of electronic power device substrates. / Pietranico, S.; Pommier, S.; Lefebvre, S.; Pattofatto, S.

В: International Journal of Fatigue, Том 31, № 11-12, 01.11.2009, стр. 1911-1920.

Результат исследований: Материалы для журналаСтатья

Pietranico, S. ; Pommier, S. ; Lefebvre, S. ; Pattofatto, S. / Thermal fatigue and failure of electronic power device substrates. В: International Journal of Fatigue. 2009 ; Том 31, № 11-12. стр. 1911-1920.
@article{a307c1af88674984a62f1161ba4455c2,
title = "Thermal fatigue and failure of electronic power device substrates",
abstract = "Electronic power devices used for transportation applications (automotive and avionics) experience severe temperature variations, which promote their thermal fatigue and failure. For example, for power modules mounted on the engine of an aircraft, temperature variations range from -55 °C (in the worst case of storage before takeoff) to +200 °C (flight). Direct bonded copper (DBC) substrates are used to isolate chips (silicon dies) from their base plates. For large thermal amplitudes, the failure occurs in DBC substrates, which are copper/ceramic/copper sandwiches. The Weibull approach was used to model the brittle fracture of the ceramic layer from a natural defect. Furthermore, geometric singularities in the upper ceramic/copper interface are at the origin of cracks that grow by fatigue along the interface and finally bifurcate and break the ceramic layer. It is discussed how the framework of linear elastic fracture mechanics (LEFM) can be used to characterize the stress field around singularities and the associated risk of failure. These two criteria and the finite element method, allow analysing how a thermal loading history may modify the risk of failure of DBC substrates. It was shown, in particular, that three overcooling cycles should produce an {"}overload retardation effect{"}. Experimentally, applying three {"}overload cycles{"} (-70 °C, +180 °C), prior to thermal fatigue cycles (-30 °C, +180 °C), increased very significantly the fatigue life of DBC substrates. This result shows that the fatigue life and the reliability of power electronic devices could be optimized using a thermo-mechanical approach of the problem and suitable failure criteria.",
keywords = "Aluminium nitride, Copper, Overloads, Variable amplitude fatigue, Weibull",
author = "S. Pietranico and S. Pommier and S. Lefebvre and S. Pattofatto",
year = "2009",
month = "11",
day = "1",
doi = "10.1016/j.ijfatigue.2009.03.011",
language = "English",
volume = "31",
pages = "1911--1920",
journal = "International Journal of Fatigue",
issn = "0142-1123",
publisher = "Elsevier Limited",
number = "11-12",

}

TY - JOUR

T1 - Thermal fatigue and failure of electronic power device substrates

AU - Pietranico, S.

AU - Pommier, S.

AU - Lefebvre, S.

AU - Pattofatto, S.

PY - 2009/11/1

Y1 - 2009/11/1

N2 - Electronic power devices used for transportation applications (automotive and avionics) experience severe temperature variations, which promote their thermal fatigue and failure. For example, for power modules mounted on the engine of an aircraft, temperature variations range from -55 °C (in the worst case of storage before takeoff) to +200 °C (flight). Direct bonded copper (DBC) substrates are used to isolate chips (silicon dies) from their base plates. For large thermal amplitudes, the failure occurs in DBC substrates, which are copper/ceramic/copper sandwiches. The Weibull approach was used to model the brittle fracture of the ceramic layer from a natural defect. Furthermore, geometric singularities in the upper ceramic/copper interface are at the origin of cracks that grow by fatigue along the interface and finally bifurcate and break the ceramic layer. It is discussed how the framework of linear elastic fracture mechanics (LEFM) can be used to characterize the stress field around singularities and the associated risk of failure. These two criteria and the finite element method, allow analysing how a thermal loading history may modify the risk of failure of DBC substrates. It was shown, in particular, that three overcooling cycles should produce an "overload retardation effect". Experimentally, applying three "overload cycles" (-70 °C, +180 °C), prior to thermal fatigue cycles (-30 °C, +180 °C), increased very significantly the fatigue life of DBC substrates. This result shows that the fatigue life and the reliability of power electronic devices could be optimized using a thermo-mechanical approach of the problem and suitable failure criteria.

AB - Electronic power devices used for transportation applications (automotive and avionics) experience severe temperature variations, which promote their thermal fatigue and failure. For example, for power modules mounted on the engine of an aircraft, temperature variations range from -55 °C (in the worst case of storage before takeoff) to +200 °C (flight). Direct bonded copper (DBC) substrates are used to isolate chips (silicon dies) from their base plates. For large thermal amplitudes, the failure occurs in DBC substrates, which are copper/ceramic/copper sandwiches. The Weibull approach was used to model the brittle fracture of the ceramic layer from a natural defect. Furthermore, geometric singularities in the upper ceramic/copper interface are at the origin of cracks that grow by fatigue along the interface and finally bifurcate and break the ceramic layer. It is discussed how the framework of linear elastic fracture mechanics (LEFM) can be used to characterize the stress field around singularities and the associated risk of failure. These two criteria and the finite element method, allow analysing how a thermal loading history may modify the risk of failure of DBC substrates. It was shown, in particular, that three overcooling cycles should produce an "overload retardation effect". Experimentally, applying three "overload cycles" (-70 °C, +180 °C), prior to thermal fatigue cycles (-30 °C, +180 °C), increased very significantly the fatigue life of DBC substrates. This result shows that the fatigue life and the reliability of power electronic devices could be optimized using a thermo-mechanical approach of the problem and suitable failure criteria.

KW - Aluminium nitride

KW - Copper

KW - Overloads

KW - Variable amplitude fatigue

KW - Weibull

UR - http://www.scopus.com/inward/record.url?scp=68949163178&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68949163178&partnerID=8YFLogxK

U2 - 10.1016/j.ijfatigue.2009.03.011

DO - 10.1016/j.ijfatigue.2009.03.011

M3 - Article

AN - SCOPUS:68949163178

VL - 31

SP - 1911

EP - 1920

JO - International Journal of Fatigue

JF - International Journal of Fatigue

SN - 0142-1123

IS - 11-12

ER -