The use of titanium alloys for details of downhole hammers

A. I. Popelyukh, A. A. Repin, S. E. Alekseev, N. V. Martyushev, Yuriy Yurievich Drozdov

Результат исследований: Материалы для журналаСтатья

Аннотация

The influence of cementation technology of titanium alloy Ti-Al-Mn on its wear resistance is studied. It is established that after lubrication a friction pair with mineral oil the wear resistance of the cemented titanium alloy is comparable to wear resistance of the tempered steel 12HN3A, and in water medium surpasses it by 1.5 times. Decrease in the tendency to seizure with steel is the main reason for increase of wear resistance of titanium alloy. Industrial tests of the ASH43 hammer have shown that the use of titanium alloys for the manufacture of hammer strikers allows to increase impact capacity by 1.5 times and to increase drilling rate by 30 % compared to hammers with steel strikers.

Язык оригиналаАнглийский
Номер статьи012116
ЖурналIOP Conference Series: Materials Science and Engineering
Том124
Номер выпуска1
DOI
СостояниеОпубликовано - 2 июн 2016

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Подробные сведения о темах исследования «The use of titanium alloys for details of downhole hammers». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать