The study of deep holes accuracy and surface roughness after gun drilling

S. V. Kirsanov, Artem Sergeevich Babaev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

Results of industrial tests of gun drills with diameter of 2.05 mm with carbide and steel stems are given. It is shown that the gun drills with cemented carbide stem and especially war-resistance coatings have a greater wear resistance and ensure lower surface roughness of the drilled holes.

Язык оригиналаАнглийский
Название основной публикацииProceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
ИздательInstitute of Electrical and Electronics Engineers Inc.
ISBN (электронное издание)9781479962211
DOI
СостояниеОпубликовано - 1 янв 2014
Событие2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 - Tomsk, Российская Федерация
Продолжительность: 16 окт 201418 окт 2014

Конференция

Конференция2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
СтранаРоссийская Федерация
ГородTomsk
Период16.10.1418.10.14

    Fingerprint

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Цитировать

Kirsanov, S. V., & Babaev, A. S. (2014). The study of deep holes accuracy and surface roughness after gun drilling. В Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 [6986950] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/MEACS.2014.6986950