The research of a pulse laser powder materials' sintering process

Результат исследований: Материалы для журналаСтатья

2 Цитирования (Scopus)

Аннотация

During the research the following problem was raised: to define the pulse laser radiation influence value on different powder materials, as well as to define experimentally the thickness and width relations of a sintered powder layer from technological laser radiation parameters. At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDM-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam [1,2,10].

Язык оригиналаАнглийский
Страницы (с-по)654-659
Число страниц6
ЖурналMaterials Science Forum
Том575-578 PART 1
СостояниеОпубликовано - 2008
Опубликовано для внешнего пользованияДа

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «The research of a pulse laser powder materials' sintering process». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать