The preparation of the Ti-Al alloys based on intermetallic phases

N. Kosova, V. Sachkov, I. Kurzina, A. Pichugina, A. Vladimirov, L. Kazantseva, Anna Sergeevna Sachkova

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

4 Цитирования (Scopus)

Аннотация

This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-scattering region (CSR) up to 100 nm) intermetallic compound TiAl3 is formed at molar ratio of Ti:Al = 1:3. Experimentally proved the possibility of produce the complex composition of alloys and intermetallic compounds and products based on them.

Язык оригиналаАнглийский
Название основной публикацииIOP Conference Series: Materials Science and Engineering
ИздательInstitute of Physics Publishing
Том112
Издание1
DOI
СостояниеОпубликовано - 18 фев 2016
Событие2nd International Symposium on Fundamental Aspects of Rare-Earth Elements Mining and Separation and Modern Materials Engineering, REES 2015 - Belokuriha, Altay, Российская Федерация
Продолжительность: 7 сен 201515 сен 2015

Другое

Другое2nd International Symposium on Fundamental Aspects of Rare-Earth Elements Mining and Separation and Modern Materials Engineering, REES 2015
СтранаРоссийская Федерация
ГородBelokuriha, Altay
Период7.9.1515.9.15

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Цитировать

Kosova, N., Sachkov, V., Kurzina, I., Pichugina, A., Vladimirov, A., Kazantseva, L., & Sachkova, A. S. (2016). The preparation of the Ti-Al alloys based on intermetallic phases. В IOP Conference Series: Materials Science and Engineering (1 ред., Том 112). [012039] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/112/1/012039