The microstructural aspects of abrasive wear resistance in composite electron beam clad coatings

Результат исследований: Материалы для журналаСтатья

11 Цитирования (Scopus)

Аннотация

The effect of microstructure and phase composition of composite coatings based on manganese-containing or nickel-containing austenitic steel and containing either 10 wt.% TiC or 15 wt.% WC on the abrasive wear resistance has been studied. Both post-deposition heat treatment and self-aging in the course of deposition served to improve the relative wear resistance coefficient by 38-42 and 5-12% for Fe-20%Mn-4%V-4%Mo + 15%WC and Fe-20%Ni-4%V-4%Mo + 15%WC coatings, respectively.

Язык оригиналаАнглийский
Страницы (с-по)318-325
Число страниц8
ЖурналApplied Surface Science
Том293
DOI
СостояниеОпубликовано - 28 фев 2014

ASJC Scopus subject areas

  • Surfaces, Coatings and Films

Fingerprint Подробные сведения о темах исследования «The microstructural aspects of abrasive wear resistance in composite electron beam clad coatings». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать