The microhardness and internal stresses allocation in superheating pipes welded node made of dissimilar steels

Aigul Ilyasova, Roman Kulesh, Lyudmila Lyubimova, Alexander Tashlykov, Anton Gerasimov, Alexander Zavorin, Evgenii Puzyrev

Результат исследований: Материалы для журналаСтатья

Выдержка

The object of research is the welded knot made of dissimilar steels 12Cr1MoV and Di-59. Research methods are spectral analysis, microhardness measurements and X-ray analysis. It is established that the structural-phase nonuniformity, significant concentration fluctuations of alloying elements, the spread in values of microhardness and mechanical characteristics along the length of the pipe can cause significant value of internal macrostress that leads to the formation of the "flaw" defect type in the welding process. It is shown how to distinguish between flaws that have appeared on the stage of production from operating flaws.

Язык оригиналаАнглийский
Номер статьи01047
ЖурналMATEC Web of Conferences
Том110
DOI
СостояниеОпубликовано - 19 июн 2017

Отпечаток

Steel
Microhardness
Residual stresses
Pipe
Defects
X ray analysis
Alloying elements
Spectrum analysis
Welding

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

Цитировать

The microhardness and internal stresses allocation in superheating pipes welded node made of dissimilar steels. / Ilyasova, Aigul; Kulesh, Roman; Lyubimova, Lyudmila; Tashlykov, Alexander; Gerasimov, Anton; Zavorin, Alexander; Puzyrev, Evgenii.

В: MATEC Web of Conferences, Том 110, 01047, 19.06.2017.

Результат исследований: Материалы для журналаСтатья

@article{e4887d6615a84277b1fccc296a8a57f7,
title = "The microhardness and internal stresses allocation in superheating pipes welded node made of dissimilar steels",
abstract = "The object of research is the welded knot made of dissimilar steels 12Cr1MoV and Di-59. Research methods are spectral analysis, microhardness measurements and X-ray analysis. It is established that the structural-phase nonuniformity, significant concentration fluctuations of alloying elements, the spread in values of microhardness and mechanical characteristics along the length of the pipe can cause significant value of internal macrostress that leads to the formation of the {"}flaw{"} defect type in the welding process. It is shown how to distinguish between flaws that have appeared on the stage of production from operating flaws.",
author = "Aigul Ilyasova and Roman Kulesh and Lyudmila Lyubimova and Alexander Tashlykov and Anton Gerasimov and Alexander Zavorin and Evgenii Puzyrev",
year = "2017",
month = "6",
day = "19",
doi = "10.1051/matecconf/201711001047",
language = "English",
volume = "110",
journal = "MATEC Web of Conferences",

}

TY - JOUR

T1 - The microhardness and internal stresses allocation in superheating pipes welded node made of dissimilar steels

AU - Ilyasova, Aigul

AU - Kulesh, Roman

AU - Lyubimova, Lyudmila

AU - Tashlykov, Alexander

AU - Gerasimov, Anton

AU - Zavorin, Alexander

AU - Puzyrev, Evgenii

PY - 2017/6/19

Y1 - 2017/6/19

N2 - The object of research is the welded knot made of dissimilar steels 12Cr1MoV and Di-59. Research methods are spectral analysis, microhardness measurements and X-ray analysis. It is established that the structural-phase nonuniformity, significant concentration fluctuations of alloying elements, the spread in values of microhardness and mechanical characteristics along the length of the pipe can cause significant value of internal macrostress that leads to the formation of the "flaw" defect type in the welding process. It is shown how to distinguish between flaws that have appeared on the stage of production from operating flaws.

AB - The object of research is the welded knot made of dissimilar steels 12Cr1MoV and Di-59. Research methods are spectral analysis, microhardness measurements and X-ray analysis. It is established that the structural-phase nonuniformity, significant concentration fluctuations of alloying elements, the spread in values of microhardness and mechanical characteristics along the length of the pipe can cause significant value of internal macrostress that leads to the formation of the "flaw" defect type in the welding process. It is shown how to distinguish between flaws that have appeared on the stage of production from operating flaws.

UR - http://www.scopus.com/inward/record.url?scp=85021344745&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85021344745&partnerID=8YFLogxK

U2 - 10.1051/matecconf/201711001047

DO - 10.1051/matecconf/201711001047

M3 - Article

AN - SCOPUS:85021344745

VL - 110

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

M1 - 01047

ER -