The method of waste recovery in the process of mineral- cotton production

N. S. Krasheninnikova, V. A. Lotov, V. I. Kosintzev, I. N. Nefedova

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

Nearly all types of the industrial waste, the waste of mineral cotton production included, are the source of environment pollution. Only working out the effective methods of waste recovering can help to settle the problem of nature protection and at the same time improve the production process. The waste appears at melt dispersing and represents free- flowing bulk material, which o tains nearly none of the thin fraction. The chemical composition of solid waste corresponds to the chemical composition of mineral cotton and at certain conditions this waste can be returned to the production process as raw material. The results of the conducted reseach serve as a basis for the technology consisting in waste formating including the following stages: waste grinding; mixing it with the binder; formatting and drying. For formating it's desirable to use the special matrix, puanson and vibrostand. The bricks drying is realised by fuming gas at temperature 200-250°C. This method gives chance of acquiring the bricks, which characteristics satisfy au requirements existing in the production of mineral cotton.

Язык оригиналаАнглийский
Название основной публикацииProceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology
ИздательInstitute of Electrical and Electronics Engineers Inc.
Страницы301-303
Число страниц3
Том1
ISBN (печатное издание)0780364864, 9780780364868
DOI
СостояниеОпубликовано - 2000
Событие4th Korea-Russia International Symposium on Science and Technology, KORUS 2000 - Ulsan, Республика Корея
Продолжительность: 27 июн 20001 июл 2000

Другое

Другое4th Korea-Russia International Symposium on Science and Technology, KORUS 2000
СтранаРеспублика Корея
ГородUlsan
Период27.6.001.7.00

Отпечаток

Cotton
Minerals
Recovery
Industrial Waste
Solid Waste
Brick
Drying
Gases
Technology
Temperature
Industrial wastes
Solid wastes
Chemical analysis
Binders
Raw materials
Pollution

ASJC Scopus subject areas

  • Clinical Biochemistry
  • Computer Networks and Communications
  • Biotechnology
  • Civil and Structural Engineering
  • Mechanics of Materials
  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Surfaces, Coatings and Films

Цитировать

Krasheninnikova, N. S., Lotov, V. A., Kosintzev, V. I., & Nefedova, I. N. (2000). The method of waste recovery in the process of mineral- cotton production. В Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology (Том 1, стр. 301-303). [865974] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/KORUS.2000.865974

The method of waste recovery in the process of mineral- cotton production. / Krasheninnikova, N. S.; Lotov, V. A.; Kosintzev, V. I.; Nefedova, I. N.

Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Том 1 Institute of Electrical and Electronics Engineers Inc., 2000. стр. 301-303 865974.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Krasheninnikova, NS, Lotov, VA, Kosintzev, VI & Nefedova, IN 2000, The method of waste recovery in the process of mineral- cotton production. в Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. том. 1, 865974, Institute of Electrical and Electronics Engineers Inc., стр. 301-303, 4th Korea-Russia International Symposium on Science and Technology, KORUS 2000, Ulsan, Республика Корея, 27.6.00. https://doi.org/10.1109/KORUS.2000.865974
Krasheninnikova NS, Lotov VA, Kosintzev VI, Nefedova IN. The method of waste recovery in the process of mineral- cotton production. В Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Том 1. Institute of Electrical and Electronics Engineers Inc. 2000. стр. 301-303. 865974 https://doi.org/10.1109/KORUS.2000.865974
Krasheninnikova, N. S. ; Lotov, V. A. ; Kosintzev, V. I. ; Nefedova, I. N. / The method of waste recovery in the process of mineral- cotton production. Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology. Том 1 Institute of Electrical and Electronics Engineers Inc., 2000. стр. 301-303
@inproceedings{e9b4eeefc5804f24a24e0823d7aa2825,
title = "The method of waste recovery in the process of mineral- cotton production",
abstract = "Nearly all types of the industrial waste, the waste of mineral cotton production included, are the source of environment pollution. Only working out the effective methods of waste recovering can help to settle the problem of nature protection and at the same time improve the production process. The waste appears at melt dispersing and represents free- flowing bulk material, which o tains nearly none of the thin fraction. The chemical composition of solid waste corresponds to the chemical composition of mineral cotton and at certain conditions this waste can be returned to the production process as raw material. The results of the conducted reseach serve as a basis for the technology consisting in waste formating including the following stages: waste grinding; mixing it with the binder; formatting and drying. For formating it's desirable to use the special matrix, puanson and vibrostand. The bricks drying is realised by fuming gas at temperature 200-250°C. This method gives chance of acquiring the bricks, which characteristics satisfy au requirements existing in the production of mineral cotton.",
keywords = "formatting, grinding, industrial waste, matrix, mineral cotton, puanson, raw material, recovering, technology, vibrostand",
author = "Krasheninnikova, {N. S.} and Lotov, {V. A.} and Kosintzev, {V. I.} and Nefedova, {I. N.}",
year = "2000",
doi = "10.1109/KORUS.2000.865974",
language = "English",
isbn = "0780364864",
volume = "1",
pages = "301--303",
booktitle = "Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - The method of waste recovery in the process of mineral- cotton production

AU - Krasheninnikova, N. S.

AU - Lotov, V. A.

AU - Kosintzev, V. I.

AU - Nefedova, I. N.

PY - 2000

Y1 - 2000

N2 - Nearly all types of the industrial waste, the waste of mineral cotton production included, are the source of environment pollution. Only working out the effective methods of waste recovering can help to settle the problem of nature protection and at the same time improve the production process. The waste appears at melt dispersing and represents free- flowing bulk material, which o tains nearly none of the thin fraction. The chemical composition of solid waste corresponds to the chemical composition of mineral cotton and at certain conditions this waste can be returned to the production process as raw material. The results of the conducted reseach serve as a basis for the technology consisting in waste formating including the following stages: waste grinding; mixing it with the binder; formatting and drying. For formating it's desirable to use the special matrix, puanson and vibrostand. The bricks drying is realised by fuming gas at temperature 200-250°C. This method gives chance of acquiring the bricks, which characteristics satisfy au requirements existing in the production of mineral cotton.

AB - Nearly all types of the industrial waste, the waste of mineral cotton production included, are the source of environment pollution. Only working out the effective methods of waste recovering can help to settle the problem of nature protection and at the same time improve the production process. The waste appears at melt dispersing and represents free- flowing bulk material, which o tains nearly none of the thin fraction. The chemical composition of solid waste corresponds to the chemical composition of mineral cotton and at certain conditions this waste can be returned to the production process as raw material. The results of the conducted reseach serve as a basis for the technology consisting in waste formating including the following stages: waste grinding; mixing it with the binder; formatting and drying. For formating it's desirable to use the special matrix, puanson and vibrostand. The bricks drying is realised by fuming gas at temperature 200-250°C. This method gives chance of acquiring the bricks, which characteristics satisfy au requirements existing in the production of mineral cotton.

KW - formatting

KW - grinding

KW - industrial waste

KW - matrix

KW - mineral cotton

KW - puanson

KW - raw material

KW - recovering

KW - technology

KW - vibrostand

UR - http://www.scopus.com/inward/record.url?scp=84960929741&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960929741&partnerID=8YFLogxK

U2 - 10.1109/KORUS.2000.865974

DO - 10.1109/KORUS.2000.865974

M3 - Conference contribution

AN - SCOPUS:84960929741

SN - 0780364864

SN - 9780780364868

VL - 1

SP - 301

EP - 303

BT - Proceedings - KORUS 2000: 4th Korea-Russia International Symposium on Science and Technology

PB - Institute of Electrical and Electronics Engineers Inc.

ER -