The influence of ZrB2-SiC powders mechanical treatment on the structure of sintered ceramic composites

S. Buyakova, A. Burlachenko, Yu Mirovoi, I. Sevostiyanova, S. Kulkov

Результат исследований: Материалы для журнала

2 Цитирования (Scopus)

Выдержка

The effect of mechanical treatment by planetary ball milling on the properties of hot pressed ZrB2 - SiC ceramics was studied. It was shown that material densification after mechanical treatment is finished at initial stages of sintering process. Addition of SiC leads to an essential increase of sample density to 99% of theoretically achievable for powder with 2% of SiC, as compared with ZrB2 with the density less than 76%. It was demonstrated that all defects that were accumulated during mechanical treatment are annealed during hot pressing, and there are no changes of CDD values in sintered ceramics.

Язык оригиналаАнглийский
Номер статьи012006
ЖурналIOP Conference Series: Materials Science and Engineering
Том140
Номер выпуска1
DOI
СостояниеОпубликовано - 8 авг 2016
СобытиеInternational Seminar on Interdisciplinary Problems in Additive Technologies - Tomsk, Российская Федерация
Продолжительность: 16 дек 201517 дек 2015

Отпечаток

Ball milling
Hot pressing
Densification
Powders
Sintering
Defects
Composite materials

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Цитировать

The influence of ZrB2-SiC powders mechanical treatment on the structure of sintered ceramic composites. / Buyakova, S.; Burlachenko, A.; Mirovoi, Yu; Sevostiyanova, I.; Kulkov, S.

В: IOP Conference Series: Materials Science and Engineering, Том 140, № 1, 012006, 08.08.2016.

Результат исследований: Материалы для журнала

@article{4ed1ed2d68b5459fae5be957ae5d9adc,
title = "The influence of ZrB2-SiC powders mechanical treatment on the structure of sintered ceramic composites",
abstract = "The effect of mechanical treatment by planetary ball milling on the properties of hot pressed ZrB2 - SiC ceramics was studied. It was shown that material densification after mechanical treatment is finished at initial stages of sintering process. Addition of SiC leads to an essential increase of sample density to 99{\%} of theoretically achievable for powder with 2{\%} of SiC, as compared with ZrB2 with the density less than 76{\%}. It was demonstrated that all defects that were accumulated during mechanical treatment are annealed during hot pressing, and there are no changes of CDD values in sintered ceramics.",
author = "S. Buyakova and A. Burlachenko and Yu Mirovoi and I. Sevostiyanova and S. Kulkov",
year = "2016",
month = "8",
day = "8",
doi = "10.1088/1757-899X/140/1/012006",
language = "English",
volume = "140",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - The influence of ZrB2-SiC powders mechanical treatment on the structure of sintered ceramic composites

AU - Buyakova, S.

AU - Burlachenko, A.

AU - Mirovoi, Yu

AU - Sevostiyanova, I.

AU - Kulkov, S.

PY - 2016/8/8

Y1 - 2016/8/8

N2 - The effect of mechanical treatment by planetary ball milling on the properties of hot pressed ZrB2 - SiC ceramics was studied. It was shown that material densification after mechanical treatment is finished at initial stages of sintering process. Addition of SiC leads to an essential increase of sample density to 99% of theoretically achievable for powder with 2% of SiC, as compared with ZrB2 with the density less than 76%. It was demonstrated that all defects that were accumulated during mechanical treatment are annealed during hot pressing, and there are no changes of CDD values in sintered ceramics.

AB - The effect of mechanical treatment by planetary ball milling on the properties of hot pressed ZrB2 - SiC ceramics was studied. It was shown that material densification after mechanical treatment is finished at initial stages of sintering process. Addition of SiC leads to an essential increase of sample density to 99% of theoretically achievable for powder with 2% of SiC, as compared with ZrB2 with the density less than 76%. It was demonstrated that all defects that were accumulated during mechanical treatment are annealed during hot pressing, and there are no changes of CDD values in sintered ceramics.

UR - http://www.scopus.com/inward/record.url?scp=84989306631&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84989306631&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/140/1/012006

DO - 10.1088/1757-899X/140/1/012006

M3 - Conference article

AN - SCOPUS:84989306631

VL - 140

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012006

ER -