The estimation of technical state and relibiality of electric machines in the process of operation

V. P. Shevchuk, O. P. Muravlev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

The servicing of working capacity of electric machines of alternating current is provided not only with the help system of scheduled-preventive maintenance, which doesn't take into account the concrete conditions of operation and it has a high labour-intensiveness of technical servicing in the modern conditions of operation. The situation which is in the sphere of operation at present is characterized by the fact that the developments connecting with the increasing of reliability doesn't prove its value. Also it doesn't achieve an expected level of reliability. And all applied actions don't give a great effect. One part of details and units of electric machines breaks down before the schedule date of repairing. Another part of details and units of electric machines which was in more favourable conditions and was fully efficient is sent to repair prematurely according to the plan. All these facts lead to the additional expenses. In spite of disadvantages of scheduled-preventive maintenance, there is no alternative. The wide range of operation conditions and modes of work of electric machines, the low level of servicing make necessary to develop a new technology of servicing and repairing on the basis of the estimate of technical conditions and prediction of reliability of electric machines and their units during the process of exploitation [2]. The problem of prediction of the technical state of electric machines during the process of operation is of great importance. It determines the securing and improvement the quality and reliability of industrial products, increasing competitiveness and it is one of the main directions of economical and social development of Russia.

Язык оригиналаАнглийский
Название основной публикации2008 International Conference Modern Technique and Technologies, MTT 2008
Страницы73-76
Число страниц4
DOI
СостояниеОпубликовано - 2008
Событие2008 International Conference Modern Technique and Technologies, MTT 2008 - Tomsk, Российская Федерация
Продолжительность: 24 мар 200828 мар 2008

Другое

Другое2008 International Conference Modern Technique and Technologies, MTT 2008
СтранаРоссийская Федерация
ГородTomsk
Период24.3.0828.3.08

Отпечаток

Electric machinery
Preventive maintenance
Repair
Personnel
Concretes

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Цитировать

Shevchuk, V. P., & Muravlev, O. P. (2008). The estimation of technical state and relibiality of electric machines in the process of operation. В 2008 International Conference Modern Technique and Technologies, MTT 2008 (стр. 73-76). [4897500] https://doi.org/10.1109/SPCMTT.2008.4897500

The estimation of technical state and relibiality of electric machines in the process of operation. / Shevchuk, V. P.; Muravlev, O. P.

2008 International Conference Modern Technique and Technologies, MTT 2008. 2008. стр. 73-76 4897500.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Shevchuk, VP & Muravlev, OP 2008, The estimation of technical state and relibiality of electric machines in the process of operation. в 2008 International Conference Modern Technique and Technologies, MTT 2008., 4897500, стр. 73-76, Tomsk, Российская Федерация, 24.3.08. https://doi.org/10.1109/SPCMTT.2008.4897500
Shevchuk VP, Muravlev OP. The estimation of technical state and relibiality of electric machines in the process of operation. В 2008 International Conference Modern Technique and Technologies, MTT 2008. 2008. стр. 73-76. 4897500 https://doi.org/10.1109/SPCMTT.2008.4897500
Shevchuk, V. P. ; Muravlev, O. P. / The estimation of technical state and relibiality of electric machines in the process of operation. 2008 International Conference Modern Technique and Technologies, MTT 2008. 2008. стр. 73-76
@inproceedings{77536caa979d4bdfbf202c0787a61e2b,
title = "The estimation of technical state and relibiality of electric machines in the process of operation",
abstract = "The servicing of working capacity of electric machines of alternating current is provided not only with the help system of scheduled-preventive maintenance, which doesn't take into account the concrete conditions of operation and it has a high labour-intensiveness of technical servicing in the modern conditions of operation. The situation which is in the sphere of operation at present is characterized by the fact that the developments connecting with the increasing of reliability doesn't prove its value. Also it doesn't achieve an expected level of reliability. And all applied actions don't give a great effect. One part of details and units of electric machines breaks down before the schedule date of repairing. Another part of details and units of electric machines which was in more favourable conditions and was fully efficient is sent to repair prematurely according to the plan. All these facts lead to the additional expenses. In spite of disadvantages of scheduled-preventive maintenance, there is no alternative. The wide range of operation conditions and modes of work of electric machines, the low level of servicing make necessary to develop a new technology of servicing and repairing on the basis of the estimate of technical conditions and prediction of reliability of electric machines and their units during the process of exploitation [2]. The problem of prediction of the technical state of electric machines during the process of operation is of great importance. It determines the securing and improvement the quality and reliability of industrial products, increasing competitiveness and it is one of the main directions of economical and social development of Russia.",
author = "Shevchuk, {V. P.} and Muravlev, {O. P.}",
year = "2008",
doi = "10.1109/SPCMTT.2008.4897500",
language = "English",
isbn = "9781424416097",
pages = "73--76",
booktitle = "2008 International Conference Modern Technique and Technologies, MTT 2008",

}

TY - GEN

T1 - The estimation of technical state and relibiality of electric machines in the process of operation

AU - Shevchuk, V. P.

AU - Muravlev, O. P.

PY - 2008

Y1 - 2008

N2 - The servicing of working capacity of electric machines of alternating current is provided not only with the help system of scheduled-preventive maintenance, which doesn't take into account the concrete conditions of operation and it has a high labour-intensiveness of technical servicing in the modern conditions of operation. The situation which is in the sphere of operation at present is characterized by the fact that the developments connecting with the increasing of reliability doesn't prove its value. Also it doesn't achieve an expected level of reliability. And all applied actions don't give a great effect. One part of details and units of electric machines breaks down before the schedule date of repairing. Another part of details and units of electric machines which was in more favourable conditions and was fully efficient is sent to repair prematurely according to the plan. All these facts lead to the additional expenses. In spite of disadvantages of scheduled-preventive maintenance, there is no alternative. The wide range of operation conditions and modes of work of electric machines, the low level of servicing make necessary to develop a new technology of servicing and repairing on the basis of the estimate of technical conditions and prediction of reliability of electric machines and their units during the process of exploitation [2]. The problem of prediction of the technical state of electric machines during the process of operation is of great importance. It determines the securing and improvement the quality and reliability of industrial products, increasing competitiveness and it is one of the main directions of economical and social development of Russia.

AB - The servicing of working capacity of electric machines of alternating current is provided not only with the help system of scheduled-preventive maintenance, which doesn't take into account the concrete conditions of operation and it has a high labour-intensiveness of technical servicing in the modern conditions of operation. The situation which is in the sphere of operation at present is characterized by the fact that the developments connecting with the increasing of reliability doesn't prove its value. Also it doesn't achieve an expected level of reliability. And all applied actions don't give a great effect. One part of details and units of electric machines breaks down before the schedule date of repairing. Another part of details and units of electric machines which was in more favourable conditions and was fully efficient is sent to repair prematurely according to the plan. All these facts lead to the additional expenses. In spite of disadvantages of scheduled-preventive maintenance, there is no alternative. The wide range of operation conditions and modes of work of electric machines, the low level of servicing make necessary to develop a new technology of servicing and repairing on the basis of the estimate of technical conditions and prediction of reliability of electric machines and their units during the process of exploitation [2]. The problem of prediction of the technical state of electric machines during the process of operation is of great importance. It determines the securing and improvement the quality and reliability of industrial products, increasing competitiveness and it is one of the main directions of economical and social development of Russia.

UR - http://www.scopus.com/inward/record.url?scp=77950881817&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77950881817&partnerID=8YFLogxK

U2 - 10.1109/SPCMTT.2008.4897500

DO - 10.1109/SPCMTT.2008.4897500

M3 - Conference contribution

AN - SCOPUS:77950881817

SN - 9781424416097

SP - 73

EP - 76

BT - 2008 International Conference Modern Technique and Technologies, MTT 2008

ER -