The effect of boron, copper, and magnesium on the ignition of HEM containing aluminum powder

I. V. Sorokin, A. G. Korotkikh, E. A. Selikhova

Результат исследований: Материалы для журналарецензирование

Аннотация

The use of metal powder as fuel in high-energy materials (HEM) for propulsion is the most energy-efficient method to increase the burning rate, combustion temperature, and specific impulse. Typically, various dispersity aluminum powders are used in the HEM composition. To improve the ignition and combustion characteristics of the HEM composition it is advisable to use the catalysts (nonmetals, metals or their oxides). This paper presents the experimental data of the HEM samples ignition containing ammonium perchlorate, butadiene rubber, micron powders of aluminum, aluminum-magnesium alloy, as well as nanopowders of amorphous boron, aluminum-copper, and aluminum-boron mixtures. The use of aluminum-copper or aluminum-boron nanopowders in the HEM composition decreases the ignition delay time by 1.3-2.0 times in comparison with Al-based HEM during CO2 laser initiation. In the case of Al-Mg powder use, the ignition delay time is changed slightly.

Язык оригиналаАнглийский
Номер статьи012067
ЖурналJournal of Physics: Conference Series
Том1675
Номер выпуска1
DOI
СостояниеОпубликовано - 15 дек 2020
Событие5th All-Russian Scientific Conference Thermophysics and Physical Hydrodynamics with the School for Young Scientists, TPH 2020 - Yalta, Crimea, Украина
Продолжительность: 13 сен 202020 сен 2020

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «The effect of boron, copper, and magnesium on the ignition of HEM containing aluminum powder». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать