The clearance control system of the lever-hinge mechanism of the mine winder braking device using the capacitive sensors

A. V. Yurchenko, A. D. Mekhtiyev, F. N. Bulatbaev, Y. G. Neshina, A. D. Alkina, M. M. Kokkoz

Результат исследований: Материалы для журналаСтатьярецензирование

9 Цитирования (Scopus)

Аннотация

The article presents the results of research to develop a method and means for monitoring the in situ condition of the joints braking devices in accordance with the gap value and the angle of rotation between segments of "Straight pin" kinematic pairs. It was obtained a mathematical model of the overlap area dependency of the sensor of plates from their relative displacement in the parameters With the help of capacitive sensors it is possible to control not only the hinged joints, but other mechanical parts of the mine winder that allows you to create the monitoring system of the technical condition in real time.

Язык оригиналаАнглийский
Номер статьи012034
ЖурналJournal of Physics: Conference Series
Том881
Номер выпуска1
DOI
СостояниеОпубликовано - 30 авг 2017
СобытиеInternational Conference on Innovations in Non-Destructive Testing, SibTest 2017 - Sosnovkav, Novosibirsk, Российская Федерация
Продолжительность: 27 июн 201730 июн 2017

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «The clearance control system of the lever-hinge mechanism of the mine winder braking device using the capacitive sensors». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать