Surface properties of aluminum alloy after laser processing and low-Temperature heating

Kseniya Batishcheva, Anastasiya Islamova

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

The superhydrophobic surface of the AMG-6 aluminum alloy was obtained by laser radiation and heating in a muffle furnace processing. The fluid volume and interval after dosing for recording the geometric characteristics of a drop by the sessile drop method were selected to determine the free surface energy (SFE) and adhesion with liquids. The effect of molecules reorientation of the treated metal surface layer after wetting with water has been established. Adhesion with lubricants and heat carriers has been determined. It has been established that laser processing of aluminum alloy can significantly reduce adhesion forces.

Язык оригиналаАнглийский
Название основной публикацииInternational Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019
РедакторыGeniy Kuznetsov, Evgeniya Orlova, Dmitry Feoktistov
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735418783
DOI
СостояниеОпубликовано - 9 авг 2019
СобытиеInternational Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment 2019, HMTTSC 2019 - Tomsk, Российская Федерация
Продолжительность: 23 апр 201925 апр 2019

Серия публикаций

НазваниеAIP Conference Proceedings
Том2135
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

КонференцияInternational Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment 2019, HMTTSC 2019
СтранаРоссийская Федерация
ГородTomsk
Период23.4.1925.4.19

Отпечаток

adhesion
aluminum alloys
surface properties
lasers
aluminum
laser
heating
heat
lubricants
temperature
furnaces
lubricant
laser heating
surface energy
wetting
retraining
metal surfaces
surface layer
surface layers
recording

ASJC Scopus subject areas

  • Ecology, Evolution, Behavior and Systematics
  • Ecology
  • Plant Science
  • Physics and Astronomy(all)
  • Nature and Landscape Conservation

Цитировать

Batishcheva, K., & Islamova, A. (2019). Surface properties of aluminum alloy after laser processing and low-Temperature heating. В G. Kuznetsov, E. Orlova, & D. Feoktistov (Ред.), International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019 [020012] (AIP Conference Proceedings; Том 2135). American Institute of Physics Inc.. https://doi.org/10.1063/1.5120649

Surface properties of aluminum alloy after laser processing and low-Temperature heating. / Batishcheva, Kseniya; Islamova, Anastasiya.

International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019. ред. / Geniy Kuznetsov; Evgeniya Orlova; Dmitry Feoktistov. American Institute of Physics Inc., 2019. 020012 (AIP Conference Proceedings; Том 2135).

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Batishcheva, K & Islamova, A 2019, Surface properties of aluminum alloy after laser processing and low-Temperature heating. в G Kuznetsov, E Orlova & D Feoktistov (ред.), International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019., 020012, AIP Conference Proceedings, том. 2135, American Institute of Physics Inc., International Youth Scientific Conference on Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment 2019, HMTTSC 2019, Tomsk, Российская Федерация, 23.4.19. https://doi.org/10.1063/1.5120649
Batishcheva K, Islamova A. Surface properties of aluminum alloy after laser processing and low-Temperature heating. В Kuznetsov G, Orlova E, Feoktistov D, редакторы, International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019. American Institute of Physics Inc. 2019. 020012. (AIP Conference Proceedings). https://doi.org/10.1063/1.5120649
Batishcheva, Kseniya ; Islamova, Anastasiya. / Surface properties of aluminum alloy after laser processing and low-Temperature heating. International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019. редактор / Geniy Kuznetsov ; Evgeniya Orlova ; Dmitry Feoktistov. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).
@inproceedings{dc31a271d9814ca9a0b856ad36feb93a,
title = "Surface properties of aluminum alloy after laser processing and low-Temperature heating",
abstract = "The superhydrophobic surface of the AMG-6 aluminum alloy was obtained by laser radiation and heating in a muffle furnace processing. The fluid volume and interval after dosing for recording the geometric characteristics of a drop by the sessile drop method were selected to determine the free surface energy (SFE) and adhesion with liquids. The effect of molecules reorientation of the treated metal surface layer after wetting with water has been established. Adhesion with lubricants and heat carriers has been determined. It has been established that laser processing of aluminum alloy can significantly reduce adhesion forces.",
author = "Kseniya Batishcheva and Anastasiya Islamova",
year = "2019",
month = "8",
day = "9",
doi = "10.1063/1.5120649",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Geniy Kuznetsov and Evgeniya Orlova and Dmitry Feoktistov",
booktitle = "International Youth Scientific Conference {"}Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment{"}, HMTTSC 2019",

}

TY - GEN

T1 - Surface properties of aluminum alloy after laser processing and low-Temperature heating

AU - Batishcheva, Kseniya

AU - Islamova, Anastasiya

PY - 2019/8/9

Y1 - 2019/8/9

N2 - The superhydrophobic surface of the AMG-6 aluminum alloy was obtained by laser radiation and heating in a muffle furnace processing. The fluid volume and interval after dosing for recording the geometric characteristics of a drop by the sessile drop method were selected to determine the free surface energy (SFE) and adhesion with liquids. The effect of molecules reorientation of the treated metal surface layer after wetting with water has been established. Adhesion with lubricants and heat carriers has been determined. It has been established that laser processing of aluminum alloy can significantly reduce adhesion forces.

AB - The superhydrophobic surface of the AMG-6 aluminum alloy was obtained by laser radiation and heating in a muffle furnace processing. The fluid volume and interval after dosing for recording the geometric characteristics of a drop by the sessile drop method were selected to determine the free surface energy (SFE) and adhesion with liquids. The effect of molecules reorientation of the treated metal surface layer after wetting with water has been established. Adhesion with lubricants and heat carriers has been determined. It has been established that laser processing of aluminum alloy can significantly reduce adhesion forces.

UR - http://www.scopus.com/inward/record.url?scp=85071035997&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85071035997&partnerID=8YFLogxK

U2 - 10.1063/1.5120649

DO - 10.1063/1.5120649

M3 - Conference contribution

AN - SCOPUS:85071035997

T3 - AIP Conference Proceedings

BT - International Youth Scientific Conference "Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment", HMTTSC 2019

A2 - Kuznetsov, Geniy

A2 - Orlova, Evgeniya

A2 - Feoktistov, Dmitry

PB - American Institute of Physics Inc.

ER -