Surface modification of selective laser melted Ti-6Al-4V by ultrasonic impact treatment and electron beam irradiation

E. A. Sinyakova, S. V. Panin, A. D. Teresov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

Changes of the surface roughness, microstructure, phase composition and microhardness of selective laser melted Ti-6Al-4V samples during electron beam irradiation and ultrasonic impact treatment were investigated by contact profilometry, optical microscopy, X-ray analysis, and hardness measurement. It was shown that electron beam irradiation and ultrasonic impact treatment of the selective laser melted Ti-6Al-4V samples smooth their surface. Significant refinement of the microstructure and TiO nanoparticles formation under ultrasonic impact treatment occur causing the increase in surface microhardness. Electron beam irradiation leads to a more significant increase in both the microhardness and thickness of the melted surface layer due to martensitic transformation.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
РедакторыVictor E. Panin, Sergey G. Psakhie, Vasily M. Fomin
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735419124
DOI
СостояниеОпубликовано - 19 ноя 2019
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20195 окт 2019

Серия публикаций

НазваниеAIP Conference Proceedings
Том2167
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
СтранаРоссийская Федерация
ГородTomsk
Период1.10.195.10.19

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Surface modification of selective laser melted Ti-6Al-4V by ultrasonic impact treatment and electron beam irradiation». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Sinyakova, E. A., Panin, S. V., & Teresov, A. D. (2019). Surface modification of selective laser melted Ti-6Al-4V by ultrasonic impact treatment and electron beam irradiation. В V. E. Panin, S. G. Psakhie, & V. M. Fomin (Ред.), Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 [020336] (AIP Conference Proceedings; Том 2167). American Institute of Physics Inc.. https://doi.org/10.1063/1.5132203