Surface modification of aisi-4620 steel with intense pulsed ion beams

D. J. Rej, H. A. Davis, M. Nastasi, J. C. Olson, E. J. Peterson, R. D. Reiswig, K. C. Walter, R. W. Stinnett, G. E. Remnev, V. K. Struts

Результат исследований: Материалы для журналаСтатьярецензирование

61 Цитирования (Scopus)

Аннотация

A 300 keV, 30 kA, 1 μs intense beam of carbon, oxygen, and hydrogen ions is used for the surface treatment of AISI-4620 steel coupons, a common material used in automotive gear applications. The beam is extracted from a magnetically-insulated vacuum diode and deposited into the top 1 μm of the target surface. The beam-solid interaction causes a rapid melt and resolidification with heating and cooling rates of up to 1010 K/s. Treated surfaces are smoothed over 1 μm-scale lengths, but are accompanied by 1 μm-diameter craters and larger-scale roughening over ≥10 μm, depending on beam fluence and number of pulses. Treated surfaces are up to 1.8 × harder with no discernible change in modulus over depths of 1 μm or more. Qualitative improvements in the wear morphology of treated surfaces are reported.

Язык оригиналаАнглийский
Страницы (с-по)987-991
Число страниц5
ЖурналNuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms
Том127-128
СостояниеОпубликовано - мая 1997

ASJC Scopus subject areas

  • Surfaces, Coatings and Films
  • Instrumentation
  • Surfaces and Interfaces

Fingerprint Подробные сведения о темах исследования «Surface modification of aisi-4620 steel with intense pulsed ion beams». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать