Surface layer structure and average contact temperature of copper-containing materials under dry sliding with high electric current density

V. V. Fadin, M. I. Aleutdinova, Valery Evgenievich Rubtsov, K. A. Aleutdinov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

Dry sliding of copper and powder composites of Cu-Fe and Cu-Fe-graphite compositions against 1045 steel under electric current of contact density higher than 250 A/cm2 has been studied, which demonstrated the change in surface layer structure and formation of tribolayer consisting of iron, copper and FeO oxide. Signs of quasi-viscous flow of worn surface were observed. It was noted that the thin contact layer containing about 40 at % of oxygen and 40% of Fe was the main factor decreasing the adhesion interaction. It was affirmed that the introduction of graphite into the primary structure of the composite leads to rather low content of FeO oxide and to the increased tendency of surface layer to catastrophic deterioration under sliding with contact current density of about 300 A/cm2. The temperature of contact did not exceed 400°C.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
ИздательAmerican Institute of Physics Inc.
Том1783
ISBN (электронное издание)9780735414457
DOI
СостояниеОпубликовано - 10 ноя 2016
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Российская Федерация
Продолжительность: 19 сен 201623 сен 2016

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
СтранаРоссийская Федерация
ГородTomsk
Период19.9.1623.9.16

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Surface layer structure and average contact temperature of copper-containing materials under dry sliding with high electric current density». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Fadin, V. V., Aleutdinova, M. I., Rubtsov, VE., & Aleutdinov, K. A. (2016). Surface layer structure and average contact temperature of copper-containing materials under dry sliding with high electric current density. В Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 (Том 1783). [020054] American Institute of Physics Inc.. https://doi.org/10.1063/1.4966347