Study on coal char ignition by radiant heat flux.

Результат исследований: Материалы для журналаСтатья

Выдержка

The study on coal char ignition by CO2-continuous laser was carried out. The coal char samples of T-grade bituminous coal and 2B-grade lignite were studied via CO2-laser ignition setup. Ignition delay times were determined at ambient condition in heat flux density range 90-200 W/cm2. The average ignition delay time value for lignite samples were 2 times lower while this difference is larger in high heat flux region and lower in low heat flux region. The kinetic constants for overall oxidation reaction were determined using analytic solution of simplified one-dimensional heat transfer equation with radiant heat transfer boundary condition. The activation energy for lignite char was found to be less than it is for bituminous coal char by approximately 20 %.

Язык оригиналаАнглийский
Номер статьи012223
ЖурналJournal of Physics: Conference Series
Том891
Номер выпуска1
DOI
СостояниеОпубликовано - 10 ноя 2017
СобытиеInternational Conference on Problems of Thermal Physics and Power Engineering 2017, PTPPE 2017 - Moscow, Российская Федерация
Продолжительность: 9 окт 201711 окт 2017

Отпечаток

lignite
coal
ignition
heat flux
grade
time lag
heat transfer
lasers
flux density
boundary conditions
activation energy
oxidation
kinetics

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Study on coal char ignition by radiant heat flux. / Korotkikh, A. G.; Slyusarskiy, K. V.

В: Journal of Physics: Conference Series, Том 891, № 1, 012223, 10.11.2017.

Результат исследований: Материалы для журналаСтатья

@article{b5d7936623a14492b9e15c0944dd998a,
title = "Study on coal char ignition by radiant heat flux.",
abstract = "The study on coal char ignition by CO2-continuous laser was carried out. The coal char samples of T-grade bituminous coal and 2B-grade lignite were studied via CO2-laser ignition setup. Ignition delay times were determined at ambient condition in heat flux density range 90-200 W/cm2. The average ignition delay time value for lignite samples were 2 times lower while this difference is larger in high heat flux region and lower in low heat flux region. The kinetic constants for overall oxidation reaction were determined using analytic solution of simplified one-dimensional heat transfer equation with radiant heat transfer boundary condition. The activation energy for lignite char was found to be less than it is for bituminous coal char by approximately 20 {\%}.",
author = "Korotkikh, {A. G.} and Slyusarskiy, {K. V.}",
year = "2017",
month = "11",
day = "10",
doi = "10.1088/1742-6596/891/1/012223",
language = "English",
volume = "891",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Study on coal char ignition by radiant heat flux.

AU - Korotkikh, A. G.

AU - Slyusarskiy, K. V.

PY - 2017/11/10

Y1 - 2017/11/10

N2 - The study on coal char ignition by CO2-continuous laser was carried out. The coal char samples of T-grade bituminous coal and 2B-grade lignite were studied via CO2-laser ignition setup. Ignition delay times were determined at ambient condition in heat flux density range 90-200 W/cm2. The average ignition delay time value for lignite samples were 2 times lower while this difference is larger in high heat flux region and lower in low heat flux region. The kinetic constants for overall oxidation reaction were determined using analytic solution of simplified one-dimensional heat transfer equation with radiant heat transfer boundary condition. The activation energy for lignite char was found to be less than it is for bituminous coal char by approximately 20 %.

AB - The study on coal char ignition by CO2-continuous laser was carried out. The coal char samples of T-grade bituminous coal and 2B-grade lignite were studied via CO2-laser ignition setup. Ignition delay times were determined at ambient condition in heat flux density range 90-200 W/cm2. The average ignition delay time value for lignite samples were 2 times lower while this difference is larger in high heat flux region and lower in low heat flux region. The kinetic constants for overall oxidation reaction were determined using analytic solution of simplified one-dimensional heat transfer equation with radiant heat transfer boundary condition. The activation energy for lignite char was found to be less than it is for bituminous coal char by approximately 20 %.

UR - http://www.scopus.com/inward/record.url?scp=85037045725&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85037045725&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/891/1/012223

DO - 10.1088/1742-6596/891/1/012223

M3 - Article

AN - SCOPUS:85037045725

VL - 891

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 012223

ER -