Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing

Аннотация

Profilometry and optical and transmission electron microscopy are used to examine the microstructure of surface layers of a low-carbon ferrite-pearlite steel subjected to turning and ultrasonic finishing. It is shown that turning peaks and valleys have different microstructures, which stipulates manifestation of technological hereditary when processing surfaces of machined parts. Ultrasonic finishing causes the severe plastic deformation of the surface layer, which favors the elimination of a technological heredity that is acquired during turning.

Язык оригинала	Английский
Страницы (с-по)	41-53
Число страниц	13
Журнал	Physics of Metals and Metallography
Том	114
Номер выпуска	1
DOI	https://doi.org/10.1134/S0031918X12110105
Состояние	Опубликовано - янв 2013

ASJC Scopus subject areas

Condensed Matter Physics
Materials Chemistry

Доступ к документу

10.1134/S0031918X12110105

Fingerprint Подробные сведения о темах исследования «Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать

Kovalevskaya, Z. G., Ivanov, Y. F., Perevalova, O. B., Klimenov, V. A., & Uvarkin, P. V. (2013). Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing. Physics of Metals and Metallography, 114(1), 41-53. https://doi.org/10.1134/S0031918X12110105

Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing. / Kovalevskaya, Zh G.; Ivanov, Yu F.; Perevalova, O. B.; Klimenov, V. A.; Uvarkin, P. V.

В: Physics of Metals and Metallography, Том 114, № 1, 01.2013, стр. 41-53.

Результат исследований: Материалы для журнала › Статья

@article{34ae19d0cdc24492906062241a691a4f,

title = "Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing",

abstract = "Profilometry and optical and transmission electron microscopy are used to examine the microstructure of surface layers of a low-carbon ferrite-pearlite steel subjected to turning and ultrasonic finishing. It is shown that turning peaks and valleys have different microstructures, which stipulates manifestation of technological hereditary when processing surfaces of machined parts. Ultrasonic finishing causes the severe plastic deformation of the surface layer, which favors the elimination of a technological heredity that is acquired during turning.",

keywords = "profilometry, technological heredity, transmission electron microscopy, turning, ultrasonic finishing",

author = "Kovalevskaya, {Zh G.} and Ivanov, {Yu F.} and Perevalova, {O. B.} and Klimenov, {V. A.} and Uvarkin, {P. V.}",

year = "2013",

month = jan,

doi = "10.1134/S0031918X12110105",

language = "English",

volume = "114",

pages = "41--53",

journal = "Physics of Metals and Metallography",

issn = "0031-918X",

publisher = "Maik Nauka-Interperiodica Publishing",

number = "1",

}

TY - JOUR

T1 - Study of microstructure of surface layers of low-carbon steel after turning and ultrasonic finishing

AU - Kovalevskaya, Zh G.

AU - Ivanov, Yu F.

AU - Perevalova, O. B.

AU - Klimenov, V. A.

AU - Uvarkin, P. V.

PY - 2013/1

Y1 - 2013/1

N2 - Profilometry and optical and transmission electron microscopy are used to examine the microstructure of surface layers of a low-carbon ferrite-pearlite steel subjected to turning and ultrasonic finishing. It is shown that turning peaks and valleys have different microstructures, which stipulates manifestation of technological hereditary when processing surfaces of machined parts. Ultrasonic finishing causes the severe plastic deformation of the surface layer, which favors the elimination of a technological heredity that is acquired during turning.

AB - Profilometry and optical and transmission electron microscopy are used to examine the microstructure of surface layers of a low-carbon ferrite-pearlite steel subjected to turning and ultrasonic finishing. It is shown that turning peaks and valleys have different microstructures, which stipulates manifestation of technological hereditary when processing surfaces of machined parts. Ultrasonic finishing causes the severe plastic deformation of the surface layer, which favors the elimination of a technological heredity that is acquired during turning.

KW - profilometry

KW - technological heredity

KW - transmission electron microscopy

KW - turning

KW - ultrasonic finishing

UR - http://www.scopus.com/inward/record.url?scp=84873837346&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84873837346&partnerID=8YFLogxK

U2 - 10.1134/S0031918X12110105

DO - 10.1134/S0031918X12110105

M3 - Article

AN - SCOPUS:84873837346

VL - 114

SP - 41

EP - 53

JO - Physics of Metals and Metallography

JF - Physics of Metals and Metallography

SN - 0031-918X

IS - 1

ER -