Study of accuracy and surface roughness of holes in comparative testing of small diameters gun drills

S. V. Kirsanov, Artem Sergeevich Babaev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

3 Цитирования (Scopus)

Аннотация

The results of industrial tests of gun drills with the diameter of 2.05 mm with carbide and with steel stems are given. It is shown that the gun drills with cemented carbide stem and especially AlTiN coating have a greater resistance and greater accuracy diametrical holes sizes in comparison to gun drill with steel stem.

Язык оригиналаАнглийский
Название основной публикацииIOP Conference Series: Materials Science and Engineering
ИздательInstitute of Physics Publishing
Том66
Издание1
DOI
СостояниеОпубликовано - 2014
Событие20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014 - Tomsk, Российская Федерация
Продолжительность: 14 апр 201418 апр 2014

Другое

Другое20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014
СтранаРоссийская Федерация
ГородTomsk
Период14.4.1418.4.14

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Цитировать

Kirsanov, S. V., & Babaev, A. S. (2014). Study of accuracy and surface roughness of holes in comparative testing of small diameters gun drills. В IOP Conference Series: Materials Science and Engineering (1 ред., Том 66). [012030] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/66/1/012030