Structure and properties of parts produced by electron-beam additive manufacturing

Vasilii Klimenov, Anatolii Klopotov, Vasilii Fedorov, Yurii Abzaev, Andrey Batranin, Kirill Kurgan, Daniyar Kairalapov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Выдержка

The paper deals with the study of structure, microstructure, composition and microhardness of a tube processed by electron-beam additive manufacturing using optical and scanning electron microscopy. The structure and macrodefects of a tube made of Grade2 titanium alloy is studied using the X-ray computed tomography. The principles of layer-by-layer assembly and boundaries after powder sintering are set out in this paper. It is found that the titanium alloy has two phases. Future work will involve methods to improve properties of created parts.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017
ИздательAmerican Institute of Physics Inc.
Том1909
ISBN (электронное издание)9780735416017
DOI
СостояниеОпубликовано - 1 дек 2017
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017 - Tomsk, Российская Федерация
Продолжительность: 9 окт 201713 окт 2017

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017
СтранаРоссийская Федерация
ГородTomsk
Период9.10.1713.10.17

Отпечаток

titanium alloys
manufacturing
electron beams
tubes
microhardness
sintering
assembly
tomography
microstructure
scanning electron microscopy
x rays

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Klimenov, V., Klopotov, A., Fedorov, V., Abzaev, Y., Batranin, A., Kurgan, K., & Kairalapov, D. (2017). Structure and properties of parts produced by electron-beam additive manufacturing. В Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017 (Том 1909). [020085] American Institute of Physics Inc.. https://doi.org/10.1063/1.5013766

Structure and properties of parts produced by electron-beam additive manufacturing. / Klimenov, Vasilii; Klopotov, Anatolii; Fedorov, Vasilii; Abzaev, Yurii; Batranin, Andrey; Kurgan, Kirill; Kairalapov, Daniyar.

Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Том 1909 American Institute of Physics Inc., 2017. 020085.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Klimenov, V, Klopotov, A, Fedorov, V, Abzaev, Y, Batranin, A, Kurgan, K & Kairalapov, D 2017, Structure and properties of parts produced by electron-beam additive manufacturing. в Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. том. 1909, 020085, American Institute of Physics Inc., International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017, Tomsk, Российская Федерация, 9.10.17. https://doi.org/10.1063/1.5013766
Klimenov V, Klopotov A, Fedorov V, Abzaev Y, Batranin A, Kurgan K и соавт. Structure and properties of parts produced by electron-beam additive manufacturing. В Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Том 1909. American Institute of Physics Inc. 2017. 020085 https://doi.org/10.1063/1.5013766
Klimenov, Vasilii ; Klopotov, Anatolii ; Fedorov, Vasilii ; Abzaev, Yurii ; Batranin, Andrey ; Kurgan, Kirill ; Kairalapov, Daniyar. / Structure and properties of parts produced by electron-beam additive manufacturing. Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017. Том 1909 American Institute of Physics Inc., 2017.
@inproceedings{82e6ca2c42554564af1eef5e2ff398fc,
title = "Structure and properties of parts produced by electron-beam additive manufacturing",
abstract = "The paper deals with the study of structure, microstructure, composition and microhardness of a tube processed by electron-beam additive manufacturing using optical and scanning electron microscopy. The structure and macrodefects of a tube made of Grade2 titanium alloy is studied using the X-ray computed tomography. The principles of layer-by-layer assembly and boundaries after powder sintering are set out in this paper. It is found that the titanium alloy has two phases. Future work will involve methods to improve properties of created parts.",
author = "Vasilii Klimenov and Anatolii Klopotov and Vasilii Fedorov and Yurii Abzaev and Andrey Batranin and Kirill Kurgan and Daniyar Kairalapov",
year = "2017",
month = "12",
day = "1",
doi = "10.1063/1.5013766",
language = "English",
volume = "1909",
booktitle = "Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Structure and properties of parts produced by electron-beam additive manufacturing

AU - Klimenov, Vasilii

AU - Klopotov, Anatolii

AU - Fedorov, Vasilii

AU - Abzaev, Yurii

AU - Batranin, Andrey

AU - Kurgan, Kirill

AU - Kairalapov, Daniyar

PY - 2017/12/1

Y1 - 2017/12/1

N2 - The paper deals with the study of structure, microstructure, composition and microhardness of a tube processed by electron-beam additive manufacturing using optical and scanning electron microscopy. The structure and macrodefects of a tube made of Grade2 titanium alloy is studied using the X-ray computed tomography. The principles of layer-by-layer assembly and boundaries after powder sintering are set out in this paper. It is found that the titanium alloy has two phases. Future work will involve methods to improve properties of created parts.

AB - The paper deals with the study of structure, microstructure, composition and microhardness of a tube processed by electron-beam additive manufacturing using optical and scanning electron microscopy. The structure and macrodefects of a tube made of Grade2 titanium alloy is studied using the X-ray computed tomography. The principles of layer-by-layer assembly and boundaries after powder sintering are set out in this paper. It is found that the titanium alloy has two phases. Future work will involve methods to improve properties of created parts.

UR - http://www.scopus.com/inward/record.url?scp=85038599920&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85038599920&partnerID=8YFLogxK

U2 - 10.1063/1.5013766

DO - 10.1063/1.5013766

M3 - Conference contribution

AN - SCOPUS:85038599920

VL - 1909

BT - Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017, AMHS 2017

PB - American Institute of Physics Inc.

ER -