Structural modification in a re-heated bead-overlapping zone of the multiple-pass plasma-transferred arc Fe-Cr-V-Mo-C coating

A. S. Degterev, S. F. Gnyusov, S. Yu Tarasov

Результат исследований: Материалы для журналаСтатьярецензирование

8 Цитирования (Scopus)

Аннотация

The structural evolution of the overlapping bead zone of Fe-Cr-V-Mo-C plasma-transferred arc (PTA) multiple-pass coating has been investigated. The overlapping bead 2–2.5 mm width zone experienced high-temperature re-heating from a successive bead deposition, which resulted in its structural evolution as compared to that of the previously deposited metal. At least three microstructurally different regions have been found inside the re-heated zone as follows: high-tempered region, eutectic carbide recrystallization region and incomplete melting region. These three structurally different regions were characterized by different microhardness and wear resistance levels. Basing upon the results of microstructural characterization, we offer schematics of the coating formation during deposition as well as discuss the role of microstructure in wear.

Язык оригиналаАнглийский
Страницы (с-по)272-280
Число страниц9
ЖурналSurface and Coatings Technology
Том329
DOI
СостояниеОпубликовано - 25 ноя 2017

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Подробные сведения о темах исследования «Structural modification in a re-heated bead-overlapping zone of the multiple-pass plasma-transferred arc Fe-Cr-V-Mo-C coating». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать