Structural and phase states in austenitic steel subjected to high-cycle fatigue

S. V. Vorob'ev, Yu F. Ivanov, V. E. Gromov, M. P. Ivakhin

Результат исследований: Материалы для журналаСтатьярецензирование

Аннотация

The destruction surface and defect substructure of the Fe-0.1C-1.71Mn-0.92Ti-18.2Cr-10.4Ni-0.71Si steel subjected to high-cycle fatigue tests is investigated by the methods of scanning and transmission electron microscopy. It is demonstrated that the fatigue tests, irrespective of the loading scheme (continuous or under conditions of intermediate stimulation by pulse current), result in the formation of a structural gradient in the material manifested through regular changes of the relief parameters of the destruction surface and defect substructure with increasing distance from the loading surface (face or back specimen side). It is revealed that scalar and excess dislocation density, volume fraction of grains that comprise deformation microtwins, and degree of dislocation substructure organization maximize near the free specimen surface.

Язык оригиналаАнглийский
Страницы (с-по)97-104
Число страниц8
ЖурналRussian Physics Journal
Том49
Номер выпуска1
DOI
СостояниеОпубликовано - янв 2006

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Structural and phase states in austenitic steel subjected to high-cycle fatigue». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать