Static fracture behavior of ultrasonic impact post-built treated SLM-manufactured Ti-6Al-4V

M. V. Burkov, A. V. Eremin, A. V. Byakov, S. V. Panin

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The paper deals with the investigation of ultrasonic impact post-build treatment of SLM-manufactured Ti-6Al-4V. SLM blanks were cut along building direction and subjected to ultrasonic impact surface treatment. Post-build treated specimens were tested by uniaxial tensile testing with in situ strain monitoring via digital image correlation technique (DIC), while the fracture surfaces were studied by scanning electron microscopy (SEM). The analysis of the experimental data allowed revealing the effect of post-build treatment on mechanical properties and on the peculiarities of deformation behavior. Analysis of SEM images of fracture surfaces allowed us to distinguish the differences between structure influence onto failure pattern both for the treated and non-treated specimens.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
РедакторыVictor E. Panin, Sergey G. Psakhie, Vasily M. Fomin
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735419124
DOI
СостояниеОпубликовано - 19 ноя 2019
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20195 окт 2019

Серия публикаций

НазваниеAIP Conference Proceedings
Том2167
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
СтранаРоссийская Федерация
ГородTomsk
Период1.10.195.10.19

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Static fracture behavior of ultrasonic impact post-built treated SLM-manufactured Ti-6Al-4V». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Burkov, M. V., Eremin, A. V., Byakov, A. V., & Panin, S. V. (2019). Static fracture behavior of ultrasonic impact post-built treated SLM-manufactured Ti-6Al-4V. В V. E. Panin, S. G. Psakhie, & V. M. Fomin (Ред.), Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 [020041] (AIP Conference Proceedings; Том 2167). American Institute of Physics Inc.. https://doi.org/10.1063/1.5131908