Starting way of electric commutator motor and scheme of its realization

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

The processing of welds at welding tubes of oil and gas pipelines now is carried out with a polishing machine powered by 220 V, 50 Hz. But, under field conditions, a source of electrical energy is the welding outfit. There is a problem of conversion of constant voltage of a welding outfit into alternate with given parameters. It is known, that at actuation of an electric tool, there is an impact current, since the braked electric motor has small electric resistance. Such a launch is harmful to the engine, and under conditions where there is an input source of restricted power comparable to power of the electric motor, it is impossible. One solution to this problem is an increase of power of the converter, that results in application of more potent power keys and other circuit components, i.e. increase of weight and overall dimensions of the device. The second way is providing a smoothly varying launch of the engine of an electric tool. Though the response time of the engine is also augmented, it succeeds in avoiding the deficiencies of the previous version.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000
ИздательInstitute of Electrical and Electronics Engineers Inc.
Страницы80-82
Число страниц3
ISBN (печатное издание)0780357892, 9780780357891
DOI
СостояниеОпубликовано - 2000
Событие6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 - Tomsk, Российская Федерация
Продолжительность: 28 фев 20003 мар 2000

Другое

Другое6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000
СтранаРоссийская Федерация
ГородTomsk
Период28.2.003.3.00

Отпечаток

Electric commutators
Electric tools
Welding
Electric motors
Engines
Polishing machines
Gas pipelines
Welds
Networks (circuits)
Electric potential
Processing

ASJC Scopus subject areas

  • Engineering(all)

Цитировать

Ogorodnikov, D. N., & Yaroslavtsev, E. V. (2000). Starting way of electric commutator motor and scheme of its realization. В Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 (стр. 80-82). [896056] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SPCMTT.2000.896056

Starting way of electric commutator motor and scheme of its realization. / Ogorodnikov, D. N.; Yaroslavtsev, E. V.

Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc., 2000. стр. 80-82 896056.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Ogorodnikov, DN & Yaroslavtsev, EV 2000, Starting way of electric commutator motor and scheme of its realization. в Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000., 896056, Institute of Electrical and Electronics Engineers Inc., стр. 80-82, 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000, Tomsk, Российская Федерация, 28.2.00. https://doi.org/10.1109/SPCMTT.2000.896056
Ogorodnikov DN, Yaroslavtsev EV. Starting way of electric commutator motor and scheme of its realization. В Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc. 2000. стр. 80-82. 896056 https://doi.org/10.1109/SPCMTT.2000.896056
Ogorodnikov, D. N. ; Yaroslavtsev, E. V. / Starting way of electric commutator motor and scheme of its realization. Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc., 2000. стр. 80-82
@inproceedings{f1e6d78089844ac3a8b52d869fbe339d,
title = "Starting way of electric commutator motor and scheme of its realization",
abstract = "The processing of welds at welding tubes of oil and gas pipelines now is carried out with a polishing machine powered by 220 V, 50 Hz. But, under field conditions, a source of electrical energy is the welding outfit. There is a problem of conversion of constant voltage of a welding outfit into alternate with given parameters. It is known, that at actuation of an electric tool, there is an impact current, since the braked electric motor has small electric resistance. Such a launch is harmful to the engine, and under conditions where there is an input source of restricted power comparable to power of the electric motor, it is impossible. One solution to this problem is an increase of power of the converter, that results in application of more potent power keys and other circuit components, i.e. increase of weight and overall dimensions of the device. The second way is providing a smoothly varying launch of the engine of an electric tool. Though the response time of the engine is also augmented, it succeeds in avoiding the deficiencies of the previous version.",
author = "Ogorodnikov, {D. N.} and Yaroslavtsev, {E. V.}",
year = "2000",
doi = "10.1109/SPCMTT.2000.896056",
language = "English",
isbn = "0780357892",
pages = "80--82",
booktitle = "Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Starting way of electric commutator motor and scheme of its realization

AU - Ogorodnikov, D. N.

AU - Yaroslavtsev, E. V.

PY - 2000

Y1 - 2000

N2 - The processing of welds at welding tubes of oil and gas pipelines now is carried out with a polishing machine powered by 220 V, 50 Hz. But, under field conditions, a source of electrical energy is the welding outfit. There is a problem of conversion of constant voltage of a welding outfit into alternate with given parameters. It is known, that at actuation of an electric tool, there is an impact current, since the braked electric motor has small electric resistance. Such a launch is harmful to the engine, and under conditions where there is an input source of restricted power comparable to power of the electric motor, it is impossible. One solution to this problem is an increase of power of the converter, that results in application of more potent power keys and other circuit components, i.e. increase of weight and overall dimensions of the device. The second way is providing a smoothly varying launch of the engine of an electric tool. Though the response time of the engine is also augmented, it succeeds in avoiding the deficiencies of the previous version.

AB - The processing of welds at welding tubes of oil and gas pipelines now is carried out with a polishing machine powered by 220 V, 50 Hz. But, under field conditions, a source of electrical energy is the welding outfit. There is a problem of conversion of constant voltage of a welding outfit into alternate with given parameters. It is known, that at actuation of an electric tool, there is an impact current, since the braked electric motor has small electric resistance. Such a launch is harmful to the engine, and under conditions where there is an input source of restricted power comparable to power of the electric motor, it is impossible. One solution to this problem is an increase of power of the converter, that results in application of more potent power keys and other circuit components, i.e. increase of weight and overall dimensions of the device. The second way is providing a smoothly varying launch of the engine of an electric tool. Though the response time of the engine is also augmented, it succeeds in avoiding the deficiencies of the previous version.

UR - http://www.scopus.com/inward/record.url?scp=84952939602&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84952939602&partnerID=8YFLogxK

U2 - 10.1109/SPCMTT.2000.896056

DO - 10.1109/SPCMTT.2000.896056

M3 - Conference contribution

AN - SCOPUS:84952939602

SN - 0780357892

SN - 9780780357891

SP - 80

EP - 82

BT - Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000

PB - Institute of Electrical and Electronics Engineers Inc.

ER -