Start synchronous motor vector control algorithm with encoder without hall-sensors

Stanislav V. Borisov, Nikolay V. Gusev, Pavel V. Bykovskih, Konstantin V. Obraztsov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

Well-known methods of vector control of permanent magnet synchronous motor suppose that before starting the motion the initial position of the rotor magnetic axis with respect to the stator magnetic field have to be determined and thereafter depending on the reference frame the motor is started in the speed control or positioning mode. Traditional method of determining initial position of the motor shaft is carried out by means of Hall sensors and\or a position sensor. In the paper method of starting the synchronous motor with unknown initial position of the rotor magnetic axis with respect to the stator magnetic field using incremental encoder is proposed and studied.

Язык оригиналаАнглийский
Название основной публикации2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings
ИздательInstitute of Electrical and Electronics Engineers Inc.
ISBN (электронное издание)9781467383837
DOI
СостояниеОпубликовано - 14 июн 2016
Событие2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Moscow, Российская Федерация
Продолжительность: 12 мая 201614 мая 2016

Серия публикаций

Название2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings

Конференция

Конференция2016 International Siberian Conference on Control and Communications, SIBCON 2016
СтранаРоссийская Федерация
ГородMoscow
Период12.5.1614.5.16

Отпечаток

Vector Control
Motor Control
Synchronous motors
Encoder
Stators
Control Algorithm
Magnetic fields
Rotors (windings)
Sensor
Sensors
Speed control
Rotor
Permanent magnets
Rotors
Magnetic Field
Permanent Magnet Synchronous Motor
Speed Control
Positioning
Unknown
Motion

ASJC Scopus subject areas

  • Signal Processing
  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Modelling and Simulation
  • Computer Networks and Communications

Цитировать

Borisov, S. V., Gusev, N. V., Bykovskih, P. V., & Obraztsov, K. V. (2016). Start synchronous motor vector control algorithm with encoder without hall-sensors. В 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings [7491729] (2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SIBCON.2016.7491729

Start synchronous motor vector control algorithm with encoder without hall-sensors. / Borisov, Stanislav V.; Gusev, Nikolay V.; Bykovskih, Pavel V.; Obraztsov, Konstantin V.

2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. 7491729 (2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings).

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Borisov, SV, Gusev, NV, Bykovskih, PV & Obraztsov, KV 2016, Start synchronous motor vector control algorithm with encoder without hall-sensors. в 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings., 7491729, 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings, Institute of Electrical and Electronics Engineers Inc., Moscow, Российская Федерация, 12.5.16. https://doi.org/10.1109/SIBCON.2016.7491729
Borisov SV, Gusev NV, Bykovskih PV, Obraztsov KV. Start synchronous motor vector control algorithm with encoder without hall-sensors. В 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2016. 7491729. (2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings). https://doi.org/10.1109/SIBCON.2016.7491729
Borisov, Stanislav V. ; Gusev, Nikolay V. ; Bykovskih, Pavel V. ; Obraztsov, Konstantin V. / Start synchronous motor vector control algorithm with encoder without hall-sensors. 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. (2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings).
@inproceedings{8d64502e0cd74da39bd9265d3f6cfa9b,
title = "Start synchronous motor vector control algorithm with encoder without hall-sensors",
abstract = "Well-known methods of vector control of permanent magnet synchronous motor suppose that before starting the motion the initial position of the rotor magnetic axis with respect to the stator magnetic field have to be determined and thereafter depending on the reference frame the motor is started in the speed control or positioning mode. Traditional method of determining initial position of the motor shaft is carried out by means of Hall sensors and\or a position sensor. In the paper method of starting the synchronous motor with unknown initial position of the rotor magnetic axis with respect to the stator magnetic field using incremental encoder is proposed and studied.",
keywords = "incremental encoder, MexBIOS, self-synchronization of the rotor field, synchronous motor, vector control",
author = "Borisov, {Stanislav V.} and Gusev, {Nikolay V.} and Bykovskih, {Pavel V.} and Obraztsov, {Konstantin V.}",
year = "2016",
month = "6",
day = "14",
doi = "10.1109/SIBCON.2016.7491729",
language = "English",
series = "2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
booktitle = "2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings",
address = "United States",

}

TY - GEN

T1 - Start synchronous motor vector control algorithm with encoder without hall-sensors

AU - Borisov, Stanislav V.

AU - Gusev, Nikolay V.

AU - Bykovskih, Pavel V.

AU - Obraztsov, Konstantin V.

PY - 2016/6/14

Y1 - 2016/6/14

N2 - Well-known methods of vector control of permanent magnet synchronous motor suppose that before starting the motion the initial position of the rotor magnetic axis with respect to the stator magnetic field have to be determined and thereafter depending on the reference frame the motor is started in the speed control or positioning mode. Traditional method of determining initial position of the motor shaft is carried out by means of Hall sensors and\or a position sensor. In the paper method of starting the synchronous motor with unknown initial position of the rotor magnetic axis with respect to the stator magnetic field using incremental encoder is proposed and studied.

AB - Well-known methods of vector control of permanent magnet synchronous motor suppose that before starting the motion the initial position of the rotor magnetic axis with respect to the stator magnetic field have to be determined and thereafter depending on the reference frame the motor is started in the speed control or positioning mode. Traditional method of determining initial position of the motor shaft is carried out by means of Hall sensors and\or a position sensor. In the paper method of starting the synchronous motor with unknown initial position of the rotor magnetic axis with respect to the stator magnetic field using incremental encoder is proposed and studied.

KW - incremental encoder

KW - MexBIOS

KW - self-synchronization of the rotor field

KW - synchronous motor

KW - vector control

UR - http://www.scopus.com/inward/record.url?scp=84978045045&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84978045045&partnerID=8YFLogxK

U2 - 10.1109/SIBCON.2016.7491729

DO - 10.1109/SIBCON.2016.7491729

M3 - Conference contribution

AN - SCOPUS:84978045045

T3 - 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings

BT - 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -