Stainless steel brackets: In vitro corrosion behaviour and mechanical debonding test

Cosmin Mihai Cotruţ, Mihail Târcolea, Maria Diana Vrânceanu, Ana Iulia Gherghilescu, Nicolae Ghiban, Florin Baciu, Ionuţ Cornel Ionescu

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The purpose of the study was to investigate the microchemical, morphological, mechanical and anticorrosive characteristics of the metallic brackets by using energy-dispersive Xray spectroscopy (EDS), scanning electron microscopy (SEM), electrochemical and shear tests. The changes resulted from the exposure of the metallic brackets to artificial saliva and debonding forces were investigated under orthodontic appliances. The results have shown that metallic brackets studied in this paper present a good design, great electrochemical behaviour in artificial saliva for different pH values (2, 5 and 7), and also great mechanical properties. In the case of shear stress the obtained values were higher than the clinical accepted value. The metallic brackets studied in this paper present a good behaviour in artificial saliva, and good mechanical characteristics. The ARI investigation revealed that most of the adhesive was left on the bracket.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials and Structures V
ИздательTrans Tech Publications Ltd
Страницы187-193
Число страниц7
ISBN (печатное издание)9783038352129
DOI
СостояниеОпубликовано - 1 янв 2014
Опубликовано для внешнего пользованияДа
Событие5th International Conference on Advanced Materials and Structures, AMS 2013 - Timisoara, Румыния
Продолжительность: 24 окт 201325 окт 2013

Серия публикаций

НазваниеSolid State Phenomena
Том216
ISSN (печатное издание)1012-0394
ISSN (электронное издание)1662-9779

Конференция

Конференция5th International Conference on Advanced Materials and Structures, AMS 2013
СтранаРумыния
ГородTimisoara
Период24.10.1325.10.13

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Atomic and Molecular Physics, and Optics

Fingerprint Подробные сведения о темах исследования «Stainless steel brackets: In vitro corrosion behaviour and mechanical debonding test». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Cotruţ, C. M., Târcolea, M., Vrânceanu, M. D., Gherghilescu, A. I., Ghiban, N., Baciu, F., & Ionescu, I. C. (2014). Stainless steel brackets: In vitro corrosion behaviour and mechanical debonding test. В Advanced Materials and Structures V (стр. 187-193). (Solid State Phenomena; Том 216). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/SSP.216.187