Selection of the severe plastic deformation mode for improving mechanical properties of AISI 201 steel

Результат исследования: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

Experimental studies of severe plastic deformation (SPD) by ABC forging and rolling methods have been carried out. The optimal values of accumulated strain and the deformation temperature for obtaining defect-free samples have been determined. Mechanical properties were established experimentally under compression and tension at ambient temperature. The possibility of increasing the yield strength, strength and ductility due to annealing of deformed samples was studied. According to confocal laser scanning microscopy, a change in the fracture mechanism of the samples was established, which is the main reason for the increase in the relative elongation of the annealed samples.

Язык оригиналаАнглийский
Заголовок главной публикацииProceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
РедакторыVasily M. Fomin, Victor E. Panin, Sergey G. Psakhie
ИздательAmerican Institute of Physics Inc.
Том2051
ISBN (электронная версия)9780735417779
DOI
Статус публикацииОпубликовано - 12 дек 2018
СобытиеInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018 - Tomsk, Российская Федерация
Длительность: 1 окт 20185 окт 2018

Конференция

КонференцияInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018
СтранаРоссийская Федерация
ГородTomsk
Период1.10.185.10.18

    Fingerprint

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Fortuna, S. V., Filippov, A. V., Tarasov, S. Y., & Filippova, E. O. (2018). Selection of the severe plastic deformation mode for improving mechanical properties of AISI 201 steel. В V. M. Fomin, V. E. Panin, & S. G. Psakhie (Ред.), Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures (Том 2051). [020093] American Institute of Physics Inc.. https://doi.org/10.1063/1.5083336