Выдержка
Estimation of influence of physical and thermal activating on adhesion between steel substrates and thermal coatings has been performed. The substrates with surfaces obtained by and ultrasonic surface plastic deformation were used. To evaluate physical activating, preheating of the substrates to 600°C was performed. To evaluate the effect of thermal activating, the substrate surfaces after interfacial detachment were examined. Bonded areas on the substrate surfaces were measured by means of optical profilometry. The experiments have shown that surface physical activating is the main factor in formation of the adhesive bond between the coating and the substrate processed with the proposed methods.
Язык оригинала | Английский |
---|---|
Название основной публикации | IOP Conference Series: Materials Science and Engineering |
Издатель | Institute of Physics Publishing |
Том | 91 |
Издание | 1 |
DOI | |
Состояние | Опубликовано - 14 сен 2015 |
Событие | 6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering - Yurga, Российская Федерация Продолжительность: 21 мая 2015 → 23 мая 2015 |
Другое
Другое | 6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering |
---|---|
Страна | Российская Федерация |
Город | Yurga |
Период | 21.5.15 → 23.5.15 |
Отпечаток
ASJC Scopus subject areas
- Engineering(all)
- Materials Science(all)
Цитировать
Research of surface activating influence on formation of adhesion between gas-thermal coating and steel substrate. / Kovalevskaya, Z.; Klimenov, V.; Zaitsev, Konstantin Victorovich.
IOP Conference Series: Materials Science and Engineering. Том 91 1. ред. Institute of Physics Publishing, 2015. 012057.Результат исследований: Материалы для книги/типы отчетов › Материалы для конференции
}
TY - GEN
T1 - Research of surface activating influence on formation of adhesion between gas-thermal coating and steel substrate
AU - Kovalevskaya, Z.
AU - Klimenov, V.
AU - Zaitsev, Konstantin Victorovich
PY - 2015/9/14
Y1 - 2015/9/14
N2 - Estimation of influence of physical and thermal activating on adhesion between steel substrates and thermal coatings has been performed. The substrates with surfaces obtained by and ultrasonic surface plastic deformation were used. To evaluate physical activating, preheating of the substrates to 600°C was performed. To evaluate the effect of thermal activating, the substrate surfaces after interfacial detachment were examined. Bonded areas on the substrate surfaces were measured by means of optical profilometry. The experiments have shown that surface physical activating is the main factor in formation of the adhesive bond between the coating and the substrate processed with the proposed methods.
AB - Estimation of influence of physical and thermal activating on adhesion between steel substrates and thermal coatings has been performed. The substrates with surfaces obtained by and ultrasonic surface plastic deformation were used. To evaluate physical activating, preheating of the substrates to 600°C was performed. To evaluate the effect of thermal activating, the substrate surfaces after interfacial detachment were examined. Bonded areas on the substrate surfaces were measured by means of optical profilometry. The experiments have shown that surface physical activating is the main factor in formation of the adhesive bond between the coating and the substrate processed with the proposed methods.
UR - http://www.scopus.com/inward/record.url?scp=84946911706&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84946911706&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/91/1/012057
DO - 10.1088/1757-899X/91/1/012057
M3 - Conference contribution
AN - SCOPUS:84946911706
VL - 91
BT - IOP Conference Series: Materials Science and Engineering
PB - Institute of Physics Publishing
ER -