Research of stress field distribution in FCC-single crystal samples in compression

E. Alferova, D. Lychagin, A. Chernyakov

    Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

    6 Цитирования (Scopus)

    Выдержка

    Theoretical distribution of a stress field in a sample in the form of a rectangular parallelepiped in compression for an isotropic material was calculated using the method of finite elements. Calculations showed that the highest stress is observed at the top and front edges of a sample. There are areas of the tension stress on vertical edges in the area of sample tops. Shift anisotropy was determined by imposing of the distributed tension field in a sample on FCC crystal of a certain crystallographic orientation. Change of shift symmetry in single crystals for different crystallographic orientations of a compression axis was considered. It was established that a shift fragmentation in the parallel octahedral planes in the conditions of plastic deformation determines the process of low-symmetric shift deformation and maintenance of higher single crystal pseudo-symmetry. Connection of the obtained results and test data on heterogeneity of plastic deformation of nickel and aluminum single crystals is discussed.

    Язык оригиналаАнглийский
    Название основной публикацииApplied Mechanics and Materials
    ИздательTrans Tech Publications Ltd
    Страницы485-490
    Число страниц6
    Том682
    ISBN (печатное издание)9783038352815
    DOI
    СостояниеОпубликовано - 2014
    Событие5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Российская Федерация
    Продолжительность: 22 мая 201423 мая 2014

    Серия публикаций

    НазваниеApplied Mechanics and Materials
    Том682
    ISSN (печатное издание)16609336
    ISSN (электронное издание)16627482

    Другое

    Другое5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
    СтранаРоссийская Федерация
    ГородYurga
    Период22.5.1423.5.14

    Отпечаток

    Compaction
    Crystal symmetry
    Single crystals
    Crystal orientation
    Plastic deformation
    Anisotropy
    Nickel
    Aluminum
    Crystals

    ASJC Scopus subject areas

    • Engineering(all)

    Цитировать

    Alferova, E., Lychagin, D., & Chernyakov, A. (2014). Research of stress field distribution in FCC-single crystal samples in compression. В Applied Mechanics and Materials (Том 682, стр. 485-490). (Applied Mechanics and Materials; Том 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.485

    Research of stress field distribution in FCC-single crystal samples in compression. / Alferova, E.; Lychagin, D.; Chernyakov, A.

    Applied Mechanics and Materials. Том 682 Trans Tech Publications Ltd, 2014. стр. 485-490 (Applied Mechanics and Materials; Том 682).

    Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

    Alferova, E, Lychagin, D & Chernyakov, A 2014, Research of stress field distribution in FCC-single crystal samples in compression. в Applied Mechanics and Materials. том. 682, Applied Mechanics and Materials, том. 682, Trans Tech Publications Ltd, стр. 485-490, Yurga, Российская Федерация, 22.5.14. https://doi.org/10.4028/www.scientific.net/AMM.682.485
    Alferova E, Lychagin D, Chernyakov A. Research of stress field distribution in FCC-single crystal samples in compression. В Applied Mechanics and Materials. Том 682. Trans Tech Publications Ltd. 2014. стр. 485-490. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.682.485
    Alferova, E. ; Lychagin, D. ; Chernyakov, A. / Research of stress field distribution in FCC-single crystal samples in compression. Applied Mechanics and Materials. Том 682 Trans Tech Publications Ltd, 2014. стр. 485-490 (Applied Mechanics and Materials).
    @inproceedings{4f6766b1598f449c8b1d2e202f6e1217,
    title = "Research of stress field distribution in FCC-single crystal samples in compression",
    abstract = "Theoretical distribution of a stress field in a sample in the form of a rectangular parallelepiped in compression for an isotropic material was calculated using the method of finite elements. Calculations showed that the highest stress is observed at the top and front edges of a sample. There are areas of the tension stress on vertical edges in the area of sample tops. Shift anisotropy was determined by imposing of the distributed tension field in a sample on FCC crystal of a certain crystallographic orientation. Change of shift symmetry in single crystals for different crystallographic orientations of a compression axis was considered. It was established that a shift fragmentation in the parallel octahedral planes in the conditions of plastic deformation determines the process of low-symmetric shift deformation and maintenance of higher single crystal pseudo-symmetry. Connection of the obtained results and test data on heterogeneity of plastic deformation of nickel and aluminum single crystals is discussed.",
    keywords = "Finite element method, Single crystal, Symmetry of shift",
    author = "E. Alferova and D. Lychagin and A. Chernyakov",
    year = "2014",
    doi = "10.4028/www.scientific.net/AMM.682.485",
    language = "English",
    isbn = "9783038352815",
    volume = "682",
    series = "Applied Mechanics and Materials",
    publisher = "Trans Tech Publications Ltd",
    pages = "485--490",
    booktitle = "Applied Mechanics and Materials",

    }

    TY - GEN

    T1 - Research of stress field distribution in FCC-single crystal samples in compression

    AU - Alferova, E.

    AU - Lychagin, D.

    AU - Chernyakov, A.

    PY - 2014

    Y1 - 2014

    N2 - Theoretical distribution of a stress field in a sample in the form of a rectangular parallelepiped in compression for an isotropic material was calculated using the method of finite elements. Calculations showed that the highest stress is observed at the top and front edges of a sample. There are areas of the tension stress on vertical edges in the area of sample tops. Shift anisotropy was determined by imposing of the distributed tension field in a sample on FCC crystal of a certain crystallographic orientation. Change of shift symmetry in single crystals for different crystallographic orientations of a compression axis was considered. It was established that a shift fragmentation in the parallel octahedral planes in the conditions of plastic deformation determines the process of low-symmetric shift deformation and maintenance of higher single crystal pseudo-symmetry. Connection of the obtained results and test data on heterogeneity of plastic deformation of nickel and aluminum single crystals is discussed.

    AB - Theoretical distribution of a stress field in a sample in the form of a rectangular parallelepiped in compression for an isotropic material was calculated using the method of finite elements. Calculations showed that the highest stress is observed at the top and front edges of a sample. There are areas of the tension stress on vertical edges in the area of sample tops. Shift anisotropy was determined by imposing of the distributed tension field in a sample on FCC crystal of a certain crystallographic orientation. Change of shift symmetry in single crystals for different crystallographic orientations of a compression axis was considered. It was established that a shift fragmentation in the parallel octahedral planes in the conditions of plastic deformation determines the process of low-symmetric shift deformation and maintenance of higher single crystal pseudo-symmetry. Connection of the obtained results and test data on heterogeneity of plastic deformation of nickel and aluminum single crystals is discussed.

    KW - Finite element method

    KW - Single crystal

    KW - Symmetry of shift

    UR - http://www.scopus.com/inward/record.url?scp=84921841268&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84921841268&partnerID=8YFLogxK

    U2 - 10.4028/www.scientific.net/AMM.682.485

    DO - 10.4028/www.scientific.net/AMM.682.485

    M3 - Conference contribution

    AN - SCOPUS:84921841268

    SN - 9783038352815

    VL - 682

    T3 - Applied Mechanics and Materials

    SP - 485

    EP - 490

    BT - Applied Mechanics and Materials

    PB - Trans Tech Publications Ltd

    ER -