Relaxation capacity and cracking resistance of nitrous coating produced by electron-beam facing of 0.6C–24Cr–0.7N–16Mn steel powder during wear by hard abrasive under heavy loads

D. N. Tagiltseva, N. A. Narkevich, I. A. Shulepov, D. D. Moiseenko

    Результат исследований: Материалы для журналаСтатья

    2 Цитирования (Scopus)

    Выдержка

    Specific features of the topography of friction tracks formed during the sliding of a WCo6 ball over an austenitic nitrous coating at various velocities of sliding under various loads using the ball-on-disc arrangement are studied and compared with those for the WCo6 ball–110Mn13 steel pair. It has been found that the wear resistance of nitrous austenite is due to its capacity to relax frictional stresses. The correlation between the H3/E2 parameter of the friction surface and the wear rate has been shown.

    Язык оригиналаАнглийский
    Страницы (с-по)104-110
    Число страниц7
    ЖурналJournal of Friction and Wear
    Том35
    Номер выпуска2
    DOI
    СостояниеОпубликовано - 1 янв 2014

    Отпечаток

    Steel
    Abrasives
    Powders
    Electron beams
    Wear of materials
    Friction
    Coatings
    Austenite
    Topography
    Wear resistance

    ASJC Scopus subject areas

    • Mechanics of Materials
    • Surfaces, Coatings and Films

    Цитировать

    Relaxation capacity and cracking resistance of nitrous coating produced by electron-beam facing of 0.6C–24Cr–0.7N–16Mn steel powder during wear by hard abrasive under heavy loads. / Tagiltseva, D. N.; Narkevich, N. A.; Shulepov, I. A.; Moiseenko, D. D.

    В: Journal of Friction and Wear, Том 35, № 2, 01.01.2014, стр. 104-110.

    Результат исследований: Материалы для журналаСтатья

    @article{68035cbdc0e64a308ddd497dcc3b9621,
    title = "Relaxation capacity and cracking resistance of nitrous coating produced by electron-beam facing of 0.6C–24Cr–0.7N–16Mn steel powder during wear by hard abrasive under heavy loads",
    abstract = "Specific features of the topography of friction tracks formed during the sliding of a WCo6 ball over an austenitic nitrous coating at various velocities of sliding under various loads using the ball-on-disc arrangement are studied and compared with those for the WCo6 ball–110Mn13 steel pair. It has been found that the wear resistance of nitrous austenite is due to its capacity to relax frictional stresses. The correlation between the H3/E2 parameter of the friction surface and the wear rate has been shown.",
    keywords = "Cracking resistance, Frictional hardening, Nitrous coating, Relaxation capacity",
    author = "Tagiltseva, {D. N.} and Narkevich, {N. A.} and Shulepov, {I. A.} and Moiseenko, {D. D.}",
    year = "2014",
    month = "1",
    day = "1",
    doi = "10.3103/S1068366614020159",
    language = "English",
    volume = "35",
    pages = "104--110",
    journal = "Journal of Friction and Wear",
    issn = "1068-3666",
    publisher = "Allerton Press Inc.",
    number = "2",

    }

    TY - JOUR

    T1 - Relaxation capacity and cracking resistance of nitrous coating produced by electron-beam facing of 0.6C–24Cr–0.7N–16Mn steel powder during wear by hard abrasive under heavy loads

    AU - Tagiltseva, D. N.

    AU - Narkevich, N. A.

    AU - Shulepov, I. A.

    AU - Moiseenko, D. D.

    PY - 2014/1/1

    Y1 - 2014/1/1

    N2 - Specific features of the topography of friction tracks formed during the sliding of a WCo6 ball over an austenitic nitrous coating at various velocities of sliding under various loads using the ball-on-disc arrangement are studied and compared with those for the WCo6 ball–110Mn13 steel pair. It has been found that the wear resistance of nitrous austenite is due to its capacity to relax frictional stresses. The correlation between the H3/E2 parameter of the friction surface and the wear rate has been shown.

    AB - Specific features of the topography of friction tracks formed during the sliding of a WCo6 ball over an austenitic nitrous coating at various velocities of sliding under various loads using the ball-on-disc arrangement are studied and compared with those for the WCo6 ball–110Mn13 steel pair. It has been found that the wear resistance of nitrous austenite is due to its capacity to relax frictional stresses. The correlation between the H3/E2 parameter of the friction surface and the wear rate has been shown.

    KW - Cracking resistance

    KW - Frictional hardening

    KW - Nitrous coating

    KW - Relaxation capacity

    UR - http://www.scopus.com/inward/record.url?scp=84912071033&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84912071033&partnerID=8YFLogxK

    U2 - 10.3103/S1068366614020159

    DO - 10.3103/S1068366614020159

    M3 - Article

    AN - SCOPUS:84912071033

    VL - 35

    SP - 104

    EP - 110

    JO - Journal of Friction and Wear

    JF - Journal of Friction and Wear

    SN - 1068-3666

    IS - 2

    ER -