R-curve behavior and flexural strength of zirconia-toughened alumina and partially stabilized zirconia composite laminates

Diego Blaese, Tobias Benitez, Marcelo Barros, Hans Jelitto, Nahum Travitzky, Dachamir Hotza, Rolf Janssen

Результат исследований: Материалы для журналаСтатья

4 Цитирования (Scopus)

Аннотация

A composite-laminate formed by thick layers (~ 320 µm) of zirconia-toughened alumina (ZTA) with thin (~ 50 µm) interlayers of zirconia partially stabilized (Y-PSZ) has been fabricated by tape casting and pressureless sintering. Fracture behavior and strength has been investigated and compared to a “monolithic” reference, e.g. a stack of zirconia-toughened alumina (ZTA) without interlayers. The fracture behavior has been analysed using stable crack growth in V-notched specimens loaded in 3-point bending. The ZTA+Y-PSZ composite laminate presented a rising crack resistance with maximum values between 6 and 14 MPa m1/2. In contrast, the “monolithic” ZTA laminate shows a plateau R-curve behavior at 2.7 MPa m1/2. Several toughening mechanisms were identified in the ZTA+Y-PSZ composite laminate, such as, crack arrest/slow down, micro cracking and bifurcation. These toughening mechanisms are most likely caused by high tensile residual stresses that were estimated theoretically.

Язык оригиналаАнглийский
Страницы (с-по)13463-13468
Число страниц6
ЖурналCeramics International
Том44
Номер выпуска12
DOI
СостояниеОпубликовано - 15 авг 2018
Опубликовано для внешнего пользованияДа

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Подробные сведения о темах исследования «R-curve behavior and flexural strength of zirconia-toughened alumina and partially stabilized zirconia composite laminates». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать