Pulse generators based on air-insulated linear-transformer-driver stages

B. M. Kovalchuk, A. V. Kharlov, E. V. Kumpyak, A. A. Zherlitsyn

Результат исследований: Материалы для журналаСтатья

14 Цитирования (Scopus)

Аннотация

In this paper we present the design and test results of pulse generators based on air-insulated linear-transformer-driver stages that drive a vacuum transmission line. A custom designed unit, referred to as a capacitor block, was developed for use as a main structural element of the transformer stages. It incorporates two capacitors GA 35426 (40 nF, 100 kV) and a multichannel multigap gas switch. Two types of stages were developed: (1) stage LTD-20 with four modules in parallel and five capacitor blocks in each module (in tests of this stage current amplitude up to 850 kA with ∼140 ns rise time was obtained on a 0.05 Ω load at 100 kV charging voltage); (2) stage LTD-4 with two modules in parallel and two capacitor blocks in each module. Several installations were built on the base of these stages, including a linear transformer, consisting of two identical LTD-20 stages in series, and a high power electron accelerator on the base of LTD-4 stages. The design, tests results, and main problems are presented and discussed in this paper for these installations. Published by the American Physical Society under the terms of the http://creativecommons.org/licenses/by/3.0/. Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

Язык оригиналаАнглийский
Номер статьи050401
ЖурналPhysical Review Special Topics - Accelerators and Beams
Том16
Номер выпуска5
DOI
СостояниеОпубликовано - 16 мая 2013
Опубликовано для внешнего пользованияДа

    Fingerprint

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)
  • Surfaces and Interfaces
  • Nuclear and High Energy Physics

Цитировать