Production of aluminium oxyhydroxides by various methods

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

This investigation is aimed at comparing the properties of the powders obtained by the methods of electric explosion of wires (EEW) and electric spark-dispersion of metal granules in water. Differences in the samples' properties caused by the physicochemical characteristics of the production processes are determined in the paper. It is shown that the electric explosion of aluminum wires in a mixture of argon and 25% oxygen results in the formation of particles consisting mainly of γ-Al2O3. Electric explosion of aluminum wires in argon allows the production of particles consisting only of metallic aluminium. Subsequent reaction of the electroexplosive Al metal powder with water leads to the formation of a nanofibrous product composed mainly of AlO(OH). Electric-spark dispersion of Al granules directly in water makes it possible to produce powders that consist of aluminium oxyhydroxides.

Язык оригиналаАнглийский
Название основной публикацииProceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
ИздательInstitute of Electrical and Electronics Engineers Inc.
ISBN (печатное издание)9781479962211
DOI
СостояниеОпубликовано - 15 дек 2014
Событие2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 - Tomsk, Российская Федерация
Продолжительность: 16 окт 201418 окт 2014

Другое

Другое2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
СтранаРоссийская Федерация
ГородTomsk
Период16.10.1418.10.14

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Fingerprint Подробные сведения о темах исследования «Production of aluminium oxyhydroxides by various methods». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Zhuravkov, S., Pustovalov, A., Lobanova, G., Kvashnina, O., & Yavorovsky, N. (2014). Production of aluminium oxyhydroxides by various methods. В Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 [6986954] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/MEACS.2014.6986954