Producing titanium-niobium alloy by high energy beam

Yury Petrovich Sharkeev, M. G. Golkovski, I. A. Glukhov, A. Yu Eroshenko, V. A. Bataev, S. V. Fortuna

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

2 Цитирования (Scopus)

Аннотация

The research is involved in producing a Ti-Nb alloy surface layer on titanium substrate by high energy beam method, as well as in examining their structures and mechanical properties. Applying electron-beam cladding it was possible to produce a Ti-Nb alloy surface layer of several millimeters, where the niobium concentration was up to 40% at. and the structure itself could be related to martensite quenching structure. At the same time, a significant microhardness increase of 3200-3400MPa was observed, which, in its turn, is connected with the formation of martensite structure. Cladding material of Ti-Nb composition could be the source in producing alloys of homogeneous microhardness and desired concentration of alloying niobium element.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction"
ИздательAmerican Institute of Physics Inc.
Том1698
ISBN (электронное издание)9780735413450
DOI
СостояниеОпубликовано - 15 янв 2016
Событие2nd All-Russian Scientific Conference of Young Scientists on Advanced Materials in Technology and Construction, AMTC 2015 - Tomsk, Российская Федерация
Продолжительность: 6 окт 20159 окт 2015

Конференция

Конференция2nd All-Russian Scientific Conference of Young Scientists on Advanced Materials in Technology and Construction, AMTC 2015
СтранаРоссийская Федерация
ГородTomsk
Период6.10.159.10.15

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Producing titanium-niobium alloy by high energy beam». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Sharkeev, Y. P., Golkovski, M. G., Glukhov, I. A., Eroshenko, A. Y., Bataev, V. A., & Fortuna, S. V. (2016). Producing titanium-niobium alloy by high energy beam. В Advanced Materials in Technology and Construction, AMTC 2015: Proceedings of the II All-Russian Scientific Conference of Young Scientists "Advanced Materials in Technology and Construction" (Том 1698). [050004] American Institute of Physics Inc.. https://doi.org/10.1063/1.4937853