Producing composite materials based on ZrB2, ZrB2-SiC

Yu A. Mirovoi, A. G. Burlachenko, S. P. Buyakova, I. N. Sevostiyanova, Sergey Nikolaevich Kul'kov

Результат исследований: Материалы для журналаСтатья

2 Цитирования (Scopus)

Аннотация

The effect of mechanical treatment by planetary ball milling on the properties of hot pressed ZrB2 - SiC ceramics was studied. It has been shown that material densification after mechanical treatment is finished at initial stages of sintering process. Addition of SiC causes a substantial increase in density of the sample to 99% of the theoretical powder containing 20% of silicon carbide, in comparison with samples ZrB2 density not exceeding 76%. It has been shown that all defects which were accumulated during mechanical treatment anneal in hot pressure process and there are no any changes of CDD values in sintered ceramics.

Язык оригиналаАнглийский
Номер статьи012035
ЖурналIOP Conference Series: Materials Science and Engineering
Том156
Номер выпуска1
DOI
СостояниеОпубликовано - 8 ноя 2016

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Producing composite materials based on ZrB<sub>2</sub>, ZrB<sub>2</sub>-SiC». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать