Preparation of ultrafine powders using target ablation by high-power ion beam of nanosecond duration

G. E. Remnev, Yu F. Ivanov, V. A. Makeev, A. N. Zakutaev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

The results of morphological and phase analyses of ultrafine powder obtained by ablation of aluminium and steel targets by a pulsed high-power ion beam are presented in the paper. The beam parameters: ion energy of 350 keV, current density of 250-300 A/cm 2, pulse duration of 60 ns. The dimensions of obtained particles are in the range from 2.5 up to 700 nm. The data of angular separation of particles from a target are presented. An angle in which the main fraction of particles propagates is 30-40°.

Язык оригиналаАнглийский
Название основной публикации2000 13th International Conference on High-Power Particle Beams, BEAMS 2000
Страницы102-105
Число страниц4
СостояниеОпубликовано - 2000
Событие2000 13th International Conference on High-Power Particle Beams, BEAMS 2000 - Nagaoka, Япония
Продолжительность: 25 июн 200030 июн 2000

Другое

Другое2000 13th International Conference on High-Power Particle Beams, BEAMS 2000
СтранаЯпония
ГородNagaoka
Период25.6.0030.6.00

ASJC Scopus subject areas

  • Nuclear and High Energy Physics

Fingerprint Подробные сведения о темах исследования «Preparation of ultrafine powders using target ablation by high-power ion beam of nanosecond duration». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Remnev, G. E., Ivanov, Y. F., Makeev, V. A., & Zakutaev, A. N. (2000). Preparation of ultrafine powders using target ablation by high-power ion beam of nanosecond duration. В 2000 13th International Conference on High-Power Particle Beams, BEAMS 2000 (стр. 102-105). [6220125]