2 Цитирования (Scopus)

Аннотация

This work describes the operating principle and test results of the diagnostics for measuring the pulsed electron beam parameters under repetitive operation mode. The diagnostics is based on a PIN-diode, which is used as a bremsstrahlung detector. The signal from a PIN-diode was converted to a pseudo constant voltage signal which can be measured by a conventional voltmeter. Then the signal acquired by the voltmeter was compared with a reference signal indicating the normal operating regime of the accelerator, thus information about the shot-to-shot reproducibility of the electron beam parameters was given. The system was developed and tested for the ASTRA-M accelerator with the following operating parameters: 470 kV accelerating voltage, 120 ns beam duration and up to 50 pulses per second repetition rate.

Язык оригиналаАнглийский
Номер статьи012044
ЖурналJournal of Physics: Conference Series
Том830
Номер выпуска1
DOI
СостояниеОпубликовано - 4 мая 2017
Событие5th International Congress on Energy Fluxes and Radiation Effects 2016, EFRE 2016 - Tomsk, Российская Федерация
Продолжительность: 2 окт 20167 окт 2016

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «PIN-diode diagnostics of pulsed electron beam for high repetition rate mode». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать